where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2274 views
Technical Discussions
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
07:07 Apr-03-2001
miniature 200MHz preamplifier

Dear Colleague,

I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.

Yosi



 
 Reply 
 
P. Palanichamy
R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH, India, Joined Jul 2000, 10

P. Palanichamy

R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH,
India,
Joined Jul 2000
10
06:57 Apr-04-2001
Re: miniature 200MHz preamplifier
Dear Dr. Yosi,

You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
Email: KSIacoustic@t-online.de
They are the experts in acoustic microscopy.

We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

With best regards,
P. Palanichamy
--------------
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi
.



 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:17 Apr-04-2001
Re: miniature 200MHz preamplifier
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

Panametrics offers fully integrated high resolution acoustic imaging systems with 400 MHz RF bandwidth and transducers up to 200 MHz. We can also supply pulser/receivers with bandwidth up to 400 MHz if you wish to build your own system. You may contact our Sales Department through the web site below if you'd like details.

--Tom Nelligan
www.panametrics.com


 
 Reply 
 
Anand Asundi
Director,
Nanyang Technological University, Singapore, Joined Feb 2001, 10

Anand Asundi

Director,
Nanyang Technological University,
Singapore,
Joined Feb 2001
10
05:45 Apr-04-2001
Re: miniature 200MHz preamplifier
There is a local Acoustical Company who have built a 200 MHz acoustical microscope. We helped them with the Data Acquisition system. If you need full details you can contact them directly at Acoustical Services Pte Ltd. (wsgan@singnet.com.sg)

Anand


 
 Reply 
 
Dr. Patel
Dr. Patel
02:49 Apr-10-2001
Re: miniature 200MHz preamplifier
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi

We can built pre-amp unfortunately they are activated with Fallon Ultrasonics Inc System. Currently we are building multipurpose acoustic microscope for displaying Rayleigh and Lcr wave and if you are interested we can send you some images. Currently we are focussing on 5-50 MHz but our system do excite upto 150 MHz of frequency. We have seen that exceeding these frequencies, most metal do not support.
We are now developing microstrucural damage equations for obtaining stresses/texture/machine effect.

Regards

Dr. Patel
.



 
 Reply 
 
Manny Butera
Manny Butera
02:49 May-29-2001
Re: miniature 200MHz preamplifier
:Dear Dr. Yosi
.
: Sonix, Inc manufactures scanning acoustic microscope that will range from 1 to 250 MHz. Contact me at 703-440-0222 Ext. 230.

Regards,
Manny Butera

: Dear Dr. Yosi,
.
: You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
: Email: KSIacoustic@t-online.de
: They are the experts in acoustic microscopy.
.
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?
.
: With best regards,
: P. Palanichamy
: --------------
: : Dear Colleague,
: .
: : I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
: .
: : Yosi
: .
.



 
 Reply 
 

Product Spotlight

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Lyft™: Pulsed Eddy Current Reinvented

PEC Reinvented—CUI Programs Redefined Corrosion under insulation (CUI) is possibly the greatest u
...
nresolved asset integrity problem in the industry. Current methods for measuring wall thickness with liftoff, without removing insulation, all have severe limitations. Eddyfi introduces Lyft — a reinvented, high-performance pulsed eddy current (PEC) solution. The patent- pending system features a state-of-the-art portable instrument, real- time C-scan imaging, fast data acquisition with grid-mapping and dynamic scanning modes, and flexibility with long cables. It can also scan through thick metal and insulation, as well as aluminum, stainless steel, and galvanized steel weather jackets. Who else but Eddyfi to reinvent an eddy current technique and redefine CUI programs. Got Lyft?
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

NDTkit RT

NDTkit RT, TESTIA's Digital Radiography software The NDTkit product line software for X-ray analysi
...
s. NDTkit RT is a software benefiting from the Ultis kernel which is dedicated to radiographic image analysis. It offers a set of tools and filtering processes to assist RT operators in finding relevant flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window