where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2357 views
Technical Discussions
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
07:07 Apr-03-2001
miniature 200MHz preamplifier

Dear Colleague,

I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.

Yosi



 
 Reply 
 
P. Palanichamy
R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH, India, Joined Jul 2000, 10

P. Palanichamy

R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH,
India,
Joined Jul 2000
10
06:57 Apr-04-2001
Re: miniature 200MHz preamplifier
Dear Dr. Yosi,

You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
Email: KSIacoustic@t-online.de
They are the experts in acoustic microscopy.

We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

With best regards,
P. Palanichamy
--------------
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi
.



 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:17 Apr-04-2001
Re: miniature 200MHz preamplifier
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

Panametrics offers fully integrated high resolution acoustic imaging systems with 400 MHz RF bandwidth and transducers up to 200 MHz. We can also supply pulser/receivers with bandwidth up to 400 MHz if you wish to build your own system. You may contact our Sales Department through the web site below if you'd like details.

--Tom Nelligan
www.panametrics.com


 
 Reply 
 
Anand Asundi
Director,
Nanyang Technological University, Singapore, Joined Feb 2001, 10

Anand Asundi

Director,
Nanyang Technological University,
Singapore,
Joined Feb 2001
10
05:45 Apr-04-2001
Re: miniature 200MHz preamplifier
There is a local Acoustical Company who have built a 200 MHz acoustical microscope. We helped them with the Data Acquisition system. If you need full details you can contact them directly at Acoustical Services Pte Ltd. (wsgan@singnet.com.sg)

Anand


 
 Reply 
 
Dr. Patel
Dr. Patel
02:49 Apr-10-2001
Re: miniature 200MHz preamplifier
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi

We can built pre-amp unfortunately they are activated with Fallon Ultrasonics Inc System. Currently we are building multipurpose acoustic microscope for displaying Rayleigh and Lcr wave and if you are interested we can send you some images. Currently we are focussing on 5-50 MHz but our system do excite upto 150 MHz of frequency. We have seen that exceeding these frequencies, most metal do not support.
We are now developing microstrucural damage equations for obtaining stresses/texture/machine effect.

Regards

Dr. Patel
.



 
 Reply 
 
Manny Butera
Manny Butera
02:49 May-29-2001
Re: miniature 200MHz preamplifier
:Dear Dr. Yosi
.
: Sonix, Inc manufactures scanning acoustic microscope that will range from 1 to 250 MHz. Contact me at 703-440-0222 Ext. 230.

Regards,
Manny Butera

: Dear Dr. Yosi,
.
: You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
: Email: KSIacoustic@t-online.de
: They are the experts in acoustic microscopy.
.
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?
.
: With best regards,
: P. Palanichamy
: --------------
: : Dear Colleague,
: .
: : I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
: .
: : Yosi
: .
.



 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window