where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Hi-Spec Systems
we are specialised in the design, development and manufacture of Phased Array and Time-of-Flight Diffraction (ToFD) ultrasonic inspection systems.
2358 views
Technical Discussions
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
07:07 Apr-03-2001
miniature 200MHz preamplifier

Dear Colleague,

I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.

Yosi



 
 Reply 
 
P. Palanichamy
R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH, India, Joined Jul 2000, 10

P. Palanichamy

R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH,
India,
Joined Jul 2000
10
06:57 Apr-04-2001
Re: miniature 200MHz preamplifier
Dear Dr. Yosi,

You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
Email: KSIacoustic@t-online.de
They are the experts in acoustic microscopy.

We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

With best regards,
P. Palanichamy
--------------
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi
.



 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:17 Apr-04-2001
Re: miniature 200MHz preamplifier
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

Panametrics offers fully integrated high resolution acoustic imaging systems with 400 MHz RF bandwidth and transducers up to 200 MHz. We can also supply pulser/receivers with bandwidth up to 400 MHz if you wish to build your own system. You may contact our Sales Department through the web site below if you'd like details.

--Tom Nelligan
www.panametrics.com


 
 Reply 
 
Anand Asundi
Director,
Nanyang Technological University, Singapore, Joined Feb 2001, 10

Anand Asundi

Director,
Nanyang Technological University,
Singapore,
Joined Feb 2001
10
05:45 Apr-04-2001
Re: miniature 200MHz preamplifier
There is a local Acoustical Company who have built a 200 MHz acoustical microscope. We helped them with the Data Acquisition system. If you need full details you can contact them directly at Acoustical Services Pte Ltd. (wsgan@singnet.com.sg)

Anand


 
 Reply 
 
Dr. Patel
Dr. Patel
02:49 Apr-10-2001
Re: miniature 200MHz preamplifier
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi

We can built pre-amp unfortunately they are activated with Fallon Ultrasonics Inc System. Currently we are building multipurpose acoustic microscope for displaying Rayleigh and Lcr wave and if you are interested we can send you some images. Currently we are focussing on 5-50 MHz but our system do excite upto 150 MHz of frequency. We have seen that exceeding these frequencies, most metal do not support.
We are now developing microstrucural damage equations for obtaining stresses/texture/machine effect.

Regards

Dr. Patel
.



 
 Reply 
 
Manny Butera
Manny Butera
02:49 May-29-2001
Re: miniature 200MHz preamplifier
:Dear Dr. Yosi
.
: Sonix, Inc manufactures scanning acoustic microscope that will range from 1 to 250 MHz. Contact me at 703-440-0222 Ext. 230.

Regards,
Manny Butera

: Dear Dr. Yosi,
.
: You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
: Email: KSIacoustic@t-online.de
: They are the experts in acoustic microscopy.
.
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?
.
: With best regards,
: P. Palanichamy
: --------------
: : Dear Colleague,
: .
: : I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
: .
: : Yosi
: .
.



 
 Reply 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

Micro CT

nanoVoxel series has nano-scale resolution by using high voltage X-ray source (from 80-300 kV) wit
...
h micro focal spot and highly sensitive detector including different kinds of big size panel detectors and lens coupling CCD.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window