where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

YXLON Copenhagen
YXLON Copenhagen is a highly specialized, award winning Danish company with 60 years of experience in portable X-ray solutions for industrial NDT.
2331 views
Technical Discussions
Yosi Bar-Cohen
R & D,
Jet Propulsion Lab (JPL), USA, Joined Nov 1998, 26

Yosi Bar-Cohen

R & D,
Jet Propulsion Lab (JPL),
USA,
Joined Nov 1998
26
07:07 Apr-03-2001
miniature 200MHz preamplifier

Dear Colleague,

I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.

Yosi



 
 Reply 
 
P. Palanichamy
R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH, India, Joined Jul 2000, 10

P. Palanichamy

R & D, SCIENTIFIC OFFICER
INDIRA GANDHI CENTRE FOR ATOMIC RESEACH,
India,
Joined Jul 2000
10
06:57 Apr-04-2001
Re: miniature 200MHz preamplifier
Dear Dr. Yosi,

You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
Email: KSIacoustic@t-online.de
They are the experts in acoustic microscopy.

We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

With best regards,
P. Palanichamy
--------------
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi
.



 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:17 Apr-04-2001
Re: miniature 200MHz preamplifier
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?

Panametrics offers fully integrated high resolution acoustic imaging systems with 400 MHz RF bandwidth and transducers up to 200 MHz. We can also supply pulser/receivers with bandwidth up to 400 MHz if you wish to build your own system. You may contact our Sales Department through the web site below if you'd like details.

--Tom Nelligan
www.panametrics.com


 
 Reply 
 
Anand Asundi
Director,
Nanyang Technological University, Singapore, Joined Feb 2001, 10

Anand Asundi

Director,
Nanyang Technological University,
Singapore,
Joined Feb 2001
10
05:45 Apr-04-2001
Re: miniature 200MHz preamplifier
There is a local Acoustical Company who have built a 200 MHz acoustical microscope. We helped them with the Data Acquisition system. If you need full details you can contact them directly at Acoustical Services Pte Ltd. (wsgan@singnet.com.sg)

Anand


 
 Reply 
 
Dr. Patel
Dr. Patel
02:49 Apr-10-2001
Re: miniature 200MHz preamplifier
: Dear Colleague,
.
: I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
.
: Yosi

We can built pre-amp unfortunately they are activated with Fallon Ultrasonics Inc System. Currently we are building multipurpose acoustic microscope for displaying Rayleigh and Lcr wave and if you are interested we can send you some images. Currently we are focussing on 5-50 MHz but our system do excite upto 150 MHz of frequency. We have seen that exceeding these frequencies, most metal do not support.
We are now developing microstrucural damage equations for obtaining stresses/texture/machine effect.

Regards

Dr. Patel
.



 
 Reply 
 
Manny Butera
Manny Butera
02:49 May-29-2001
Re: miniature 200MHz preamplifier
:Dear Dr. Yosi
.
: Sonix, Inc manufactures scanning acoustic microscope that will range from 1 to 250 MHz. Contact me at 703-440-0222 Ext. 230.

Regards,
Manny Butera

: Dear Dr. Yosi,
.
: You may contact contact Dr. Frank Pobig, M/s Kramer Scientific Instruments GmbH, Lerchenweg 16-18, Postfach 1922, 35745 Herborn, Germany.
: Email: KSIacoustic@t-online.de
: They are the experts in acoustic microscopy.
.
: We are also interested in building/procuring Aoustic Microscopy at our Division. Could you kindly send possible details regarding the approximate cost for buiding a microscope with 200MHz working frequency?
.
: With best regards,
: P. Palanichamy
: --------------
: : Dear Colleague,
: .
: : I am looking for a miniature 200MHz preamplifier that is mounted on a 6-8 mm wide printed circuit board. The desired amplification is >5dB and it is intended for acoustic microscopy application. I am wondering if you know of anyone that is either making or working on such a preamplifier.
: .
: : Yosi
: .
.



 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window