where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
366 views
Technical Discussions
Massimiliano Pau
Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering, Italy, Joined Sep 2002, 25

Massimiliano Pau

Teacher, -
Univ. of Cagliari, Dept. of Mechanical Engineering,
Italy,
Joined Sep 2002
25
03:38 Jul-25-1998
Analysis of contact patches with pulse-echo method

Hello,

i tried to apply a classic "pulse-echo" method to study
shape and dimensions of contact patches between rail
and wheel

Using a model (Krolikowski, 1992) I was able to calculate
amount of REAL contact area, which is a few part of nominal
(about 30% for a 400 MPa nominal pressure applied)

This is a graphical output (check the attached URL)

There is someone who perform similar analysis?





 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 266

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
266
09:18 Jul-25-1998
Re: Analysis of contact patches with pulse-echo method
: Hello,

: i tried to apply a classic "pulse-echo" method to study
: shape and dimensions of contact patches between rail
: and wheel

: Using a model (Krolikowski, 1992) I was able to calculate
: amount of REAL contact area, which is a few part of nominal
: (about 30% for a 400 MPa nominal pressure applied)

: This is a graphical output (check the attached URL)

: There is someone who perform similar analysis?

You can very precisely see the contact areas using the method, that we are using in our ultrasonic camera for the fingerprints (see the paper in the may ndt journal or on our page).
We have made many experiments with a contact of two bodys (with many materials). The results are very good. I think, it would be easy to adapt this principle for you experiments.
If you are interesting in doing it, please contact us.




 
 Reply 
 

Product Spotlight

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window