where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
550 views
Classified Ads
Bill Kiesel
Bill Kiesel
04:46 Apr-27-2007
Penetrant dry oven

This oven was fabricated by Accent NDT Systems, Springfield, Ma (413) 785-1654. The oven is designed to be used as part of the liquid penetrant testing process to dry water from the part surface. The maximum allowable temperature for this process is 160 degrees f. using forced hot air with a oven uniformity of +/- 15 degrees. This is not the maximum temperature capability of the oven. For many years it was used at Titeflex in Springfield and met those requirements. This oven has two doors one on the side and the other is on the front, these doors are pneumatic and open up (not out) to save space. Inside work space is elevated to about 37" off the ground (this helps to integrate with other equipment) and is 70"long X 30"deep X 36"high. The overall size is 75.5"long X 39"deep X 74"high (110" height clearance needed to open the doors). Power requirements are 220v, 25 amps, 3 phase. WATLOW controller with over-temp cut-off was fully calibrated when the oven was last in use (1-2 years ago). We will consider anyoffers on price. The current location is Laconia New Hampshire. (New England delivery may be possible for a fee) If interested please make an offer. Please contact me at the below number or (603) 455-8470 cell. I have pictures that I can e-mail upon request.


    
 
 

Product Spotlight

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

Ultrasonic tomograph for imaging of concrete structures А1040 MIRA

Applicable for concrete inspection allowing imaging of the internal structure of objects from conc
...
rete, reinforced concrete, different stones. The operation applies pulse-echo technique at one-side access to the object. The instrument is feasible for concrete inspection for searching conduct ducts, conduits, detection of foreign inclusions, holes, honeycombing, cracks and other concrete defects.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window