where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

738 views
Technical Discussions
AYHAN ACAR
Director
HEMISPHERE/YARIMKURE LTD., Turkey, Joined Apr 2001, 1

AYHAN ACAR

Director
HEMISPHERE/YARIMKURE LTD.,
Turkey,
Joined Apr 2001
1
09:24 Apr-09-2001
1000 KV X-RAY EQUIPMENT

Hemisphere Ltd. is an agent distributor for NDT products over the last 10 years in Turkey.

We are looking for a new 1000 KV x-ray equipment for ammunition inspection.

If you can supply it and wish to cooperate with our company on commission basis, please confirm. Then, we will send details of our enquiry.

Regards.


 
 Reply 
 
Jim Knowles
Jim Knowles
05:32 Apr-18-2001
Re: 1000 KV X-RAY EQUIPMENT
: Hemisphere Ltd. is an agent distributor for NDT products over the last 10 years in Turkey.
.
: We are looking for a new 1000 KV x-ray equipment for ammunition inspection.
.
: If you can supply it and wish to cooperate with our company on commission basis, please confirm. Then, we will send details of our enquiry.
.
: Regards.
.C S Products (Testing Equipment) Ltd have supplied this type of equipment, but we wish to know if the inspection is film based or digital imaging as this can have amarked effect of the equipment and price.
Regards
Jim Knowles



 
 Reply 
 

Product Spotlight

HD-CR 35 NDT Computed Radiography System

Portable high-resolution CR scanner for all radiography applications - weld testing, profile images
...
and aerospace. No matter what type of radiographic testing you are performing, the unique TreFoc Technology of the HD-CR 35 NDT imaging plate scanner always guarantees the highest image quality.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window