where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
873 views
Technical Discussions
Ken
Ken
02:32 Apr-26-2001
high speed rail inspection

hi everyone,

i'm currently doing research on rail inspection and was wondering
if there any technology available for detecting cracks at high
speed?? (150-200 miles/hr).

Thanks in advance,
Ken



    
 
 Reply 
 
John Hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 73

John Hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
73
07:57 Apr-26-2001
Re: high speed rail inspection
I would say that eddy current should be top of the list. The other techniques are going to be too slow.

Advantages
Inspection speed limited by response of front end. We have tested in copper rod mills at 60mph
Signal coupling efficiency is reliable.
Disadvantage
Surface breaking defects only.

Regards

John Hansen
Hocking NDT Ltd.


    
 
 Reply 
 
Steve Kane
Steve Kane
08:20 Apr-26-2001
Re: high speed rail inspection
You may want to contact DAPCO, Ridgefield, CT. Phone
203-438-9696. They have much experience with rail inspection.



    
 
 Reply 
 
Ron Mahler
Ron Mahler
00:40 Apr-29-2001
Re: high speed rail inspection
: hi everyone,
.
: i'm currently doing research on rail inspection and was wondering
: if there any technology available for detecting cracks at high
: speed?? (150-200 miles/hr).

Hi Ken,
DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
There are several phisical limitations by increasing the speed above this limit.
.
: Thanks in advance,
: Ken
.



    
 
 Reply 
 
SHARIF ABDEEN
SHARIF ABDEEN
07:55 Feb-05-2002
Re: high speed rail inspection
: : hi everyone,
: .
: : i'm currently doing research on rail inspection and was wondering
: : if there any technology available for detecting cracks at high
: : speed?? (150-200 miles/hr).
.
: Hi Ken,
: DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
: The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
: There are several phisical limitations by increasing the speed above this limit.
: .
: : Thanks in advance,
: : Ken
: .
.GOOD




    
 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window