where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

USA Borescopes
USA Borescopes is your one stop source for all your visual inspection requirements. We offer borescopes, videoscopes, push cameras and pipe ins ...
940 views
Technical Discussions
Ken
Ken
02:32 Apr-26-2001
high speed rail inspection

hi everyone,

i'm currently doing research on rail inspection and was wondering
if there any technology available for detecting cracks at high
speed?? (150-200 miles/hr).

Thanks in advance,
Ken



 
 Reply 
 
John Hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 73

John Hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
73
07:57 Apr-26-2001
Re: high speed rail inspection
I would say that eddy current should be top of the list. The other techniques are going to be too slow.

Advantages
Inspection speed limited by response of front end. We have tested in copper rod mills at 60mph
Signal coupling efficiency is reliable.
Disadvantage
Surface breaking defects only.

Regards

John Hansen
Hocking NDT Ltd.


 
 Reply 
 
Steve Kane
Steve Kane
08:20 Apr-26-2001
Re: high speed rail inspection
You may want to contact DAPCO, Ridgefield, CT. Phone
203-438-9696. They have much experience with rail inspection.



 
 Reply 
 
Ron Mahler
Ron Mahler
00:40 Apr-29-2001
Re: high speed rail inspection
: hi everyone,
.
: i'm currently doing research on rail inspection and was wondering
: if there any technology available for detecting cracks at high
: speed?? (150-200 miles/hr).

Hi Ken,
DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
There are several phisical limitations by increasing the speed above this limit.
.
: Thanks in advance,
: Ken
.



 
 Reply 
 
SHARIF ABDEEN
SHARIF ABDEEN
07:55 Feb-05-2002
Re: high speed rail inspection
: : hi everyone,
: .
: : i'm currently doing research on rail inspection and was wondering
: : if there any technology available for detecting cracks at high
: : speed?? (150-200 miles/hr).
.
: Hi Ken,
: DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
: The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
: There are several phisical limitations by increasing the speed above this limit.
: .
: : Thanks in advance,
: : Ken
: .
.GOOD




 
 Reply 
 

Product Spotlight

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

VeeScan AirCraft Wheel Inspection

The VEESCAN offers maximum flexibility, has a proven mechanical design and records of breakdown-fr
...
ee operation of over 365 days. Appealing to companies in the Aerospace industry, the VEESCAN is ideal for all wheel-testing environments. With a wide selection of probes, the VeeScan allows your wheel testing facility the flexibility to select the most compatible configurations with their workload.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window