where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
885 views
Technical Discussions
Ken
Ken
02:32 Apr-26-2001
high speed rail inspection

hi everyone,

i'm currently doing research on rail inspection and was wondering
if there any technology available for detecting cracks at high
speed?? (150-200 miles/hr).

Thanks in advance,
Ken



    
 
 Reply 
 
John Hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 73

John Hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
73
07:57 Apr-26-2001
Re: high speed rail inspection
I would say that eddy current should be top of the list. The other techniques are going to be too slow.

Advantages
Inspection speed limited by response of front end. We have tested in copper rod mills at 60mph
Signal coupling efficiency is reliable.
Disadvantage
Surface breaking defects only.

Regards

John Hansen
Hocking NDT Ltd.


    
 
 Reply 
 
Steve Kane
Steve Kane
08:20 Apr-26-2001
Re: high speed rail inspection
You may want to contact DAPCO, Ridgefield, CT. Phone
203-438-9696. They have much experience with rail inspection.



    
 
 Reply 
 
Ron Mahler
Ron Mahler
00:40 Apr-29-2001
Re: high speed rail inspection
: hi everyone,
.
: i'm currently doing research on rail inspection and was wondering
: if there any technology available for detecting cracks at high
: speed?? (150-200 miles/hr).

Hi Ken,
DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
There are several phisical limitations by increasing the speed above this limit.
.
: Thanks in advance,
: Ken
.



    
 
 Reply 
 
SHARIF ABDEEN
SHARIF ABDEEN
07:55 Feb-05-2002
Re: high speed rail inspection
: : hi everyone,
: .
: : i'm currently doing research on rail inspection and was wondering
: : if there any technology available for detecting cracks at high
: : speed?? (150-200 miles/hr).
.
: Hi Ken,
: DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
: The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
: There are several phisical limitations by increasing the speed above this limit.
: .
: : Thanks in advance,
: : Ken
: .
.GOOD




    
 
 Reply 
 

Product Spotlight

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window