where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
878 views
Technical Discussions
Ken
Ken
02:32 Apr-26-2001
high speed rail inspection

hi everyone,

i'm currently doing research on rail inspection and was wondering
if there any technology available for detecting cracks at high
speed?? (150-200 miles/hr).

Thanks in advance,
Ken



    
 
 Reply 
 
John Hansen
Director, - Eddy Current Technology
ETher NDE Ltd, United Kingdom, Joined Oct 1999, 73

John Hansen

Director, - Eddy Current Technology
ETher NDE Ltd,
United Kingdom,
Joined Oct 1999
73
07:57 Apr-26-2001
Re: high speed rail inspection
I would say that eddy current should be top of the list. The other techniques are going to be too slow.

Advantages
Inspection speed limited by response of front end. We have tested in copper rod mills at 60mph
Signal coupling efficiency is reliable.
Disadvantage
Surface breaking defects only.

Regards

John Hansen
Hocking NDT Ltd.


    
 
 Reply 
 
Steve Kane
Steve Kane
08:20 Apr-26-2001
Re: high speed rail inspection
You may want to contact DAPCO, Ridgefield, CT. Phone
203-438-9696. They have much experience with rail inspection.



    
 
 Reply 
 
Ron Mahler
Ron Mahler
00:40 Apr-29-2001
Re: high speed rail inspection
: hi everyone,
.
: i'm currently doing research on rail inspection and was wondering
: if there any technology available for detecting cracks at high
: speed?? (150-200 miles/hr).

Hi Ken,
DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
There are several phisical limitations by increasing the speed above this limit.
.
: Thanks in advance,
: Ken
.



    
 
 Reply 
 
SHARIF ABDEEN
SHARIF ABDEEN
07:55 Feb-05-2002
Re: high speed rail inspection
: : hi everyone,
: .
: : i'm currently doing research on rail inspection and was wondering
: : if there any technology available for detecting cracks at high
: : speed?? (150-200 miles/hr).
.
: Hi Ken,
: DB (the German Railways) operates for the last 4 years a high speed rail inspection system from ScanMaster (see details at www.scanmaster-irt.com)
: The system is up to 100Km/Hr and resolution of defect is 6.0 mm.
: There are several phisical limitations by increasing the speed above this limit.
: .
: : Thanks in advance,
: : Ken
: .
.GOOD




    
 
 Reply 
 

Product Spotlight

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Echomac® Small

Available with up to eight channels of electronics to detect and evaluate thickness, flaws and eccen
...
tricity, this UT tester is housed in a convenient, smaller cabinet. This instrument can be used in conjunction with bubbler or immersion tank systems, or with a test bench or in laboratory applications. The Echomac® Small is available in the FD4, FD6 or FD6A versions.
>

TOPAZ® 64: Fully Integrated Portable 32 or 64 Channel PAUT Instrument with FMC & TFM

Introducing TOPAZ64, the industry’s most intelligent fully integrated, portable 32 or 64-channel
...
phased array ultrasound (UT) instrument. TOPAZ64 combines code-compliant phased array UT with the industry’s most advanced full matrix capture (FMC) and total focusing method (TFM) capabilities. Featuring the highest acquisition frequency in its class, high resolution FMC and a 12” multi-touchscreen, users can easily visualize even the smallest flaws. TOPAZ64 can generate a bipolar pulse that provides more acoustic energy versus previous models for punching through thick components. The result is a portable tool that delivers increased inspection coverage, more accurate signals, and the ability to handle all UT inspections in one package. TOPAZ64 is ideal for challenging applications in transportation, oil and gas, manufacturing and power generation.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window