where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

393 views
Technical Discussions
Sergio Bilbao
Engineering
ITP, Spain, Joined Apr 2001, 1

Sergio Bilbao

Engineering
ITP,
Spain,
Joined Apr 2001
1
02:09 Apr-27-2001
Looking for information

I´m finishing engineering. Thus I have to make a project.

My project is about an automated UT installation based on pulse-echo method.

Could anyone send me information about this?

Any kind of information would be thanked.

Thanks a lot!!!


    
 
 
Herman Figueroa
NDT Inspector
Canada, Joined May 2001, 5

Herman Figueroa

NDT Inspector
Canada,
Joined May 2001
5
04:13 May-24-2001
Re: Looking for information

: I´m finishing engineering. Thus I have to make a project.
.
: My project is about an automated UT installation based on pulse-echo method.
.
: Could anyone send me information about this?
.
: Any kind of information would be thanked.
.
: Thanks a lot!!!
.
Hi Sergio
I am finishing enginering to, and i found a very good web site that help me a lot you visit this web and try it http://www.cnde.iastate.edu/cnde/index.html
Herman
Caracas, Venezuela



    
 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window