where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1547 views
Technical Discussions
Theodoros Theodoulidis
Teacher, Researcher
University of Western Macedonia, Greece, Joined Dec 1999, 5

Theodoros Theodoulidis

Teacher, Researcher
University of Western Macedonia,
Greece,
Joined Dec 1999
5
01:47 Feb-15-2001
Wood moisture measurement

I believe that the two main methods of wood moisture measurement are:
1) The drying oven method
2) The electric method
I want to ask if I can measure it by using UT, since I have seen that ultrasonic velocity is affected by moisture content.
Is there active research on the subject?



 
 Reply 
 
Bernd Wolter, IZFP, Saarbruecken, Germany
Bernd Wolter, IZFP, Saarbruecken, Germany
04:04 Feb-15-2001
Re: Wood moisture measurement
You also can measure moisture by a variety of other nondestructive methods. Some companies offer commercial hand-held sensors based on electrical resistivity measuring for wood moisture determination. Besides, dielectric methods (capacitice methods, microwaves, time-domain reflectometry), thermographic methods and x-ray methods are used for it.

A survey about wood moisture measurement is given by: Melhorn L., Plinke B.; "Zum Stand der Feuchtemessung an Massivholz", Holz-Zentralblatt 120, p. 1837, 1990 (in German). Ultrasound for wood moisture measurement is used e.g. by: Bernatowicz G., Matejak M.; "Application of Ultrasound Time Measurements for Moisture Content detection During Drying", Proc. 1st Europ. Symp. Nondestructive Evaluation of Wood, 21.-23. Sept. ‘94, Sopron, Paper 4, 1994.

At IZFP, we are using NMR (Nuclear Magnetic Resonance) in One-Sided Access for depth-profiling of the moisture content in wood. In contrast to other nondestructive methods, NMR does also allows to determine detph-profiles of wood density. Therefore it is possible to determine absolute moisture contents in mass-%.


 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 262

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
262
04:22 Feb-15-2001
Re: Wood moisture measurement
: I believe that the two main methods of wood moisture measurement are:
: 1) The drying oven method
: 2) The electric method
: I want to ask if I can measure it by using UT, since I have seen that ultrasonic velocity is affected by moisture content.
: Is there active research on the subject?
.
Such research can be relatively easy done. If you are interested, we can test it, using transmission of air ultrasound through the wood.
We have ready made devices, suitable for this purpose.
It seems for me, that it should work, but needs many tests to calibrate the measurement.

Wieslaw Bicz



 
 Reply 
 
Nikolay Kostadinov Ganchev
Nikolay Kostadinov Ganchev
01:49 Apr-28-2001
Re: Wood moisture measurement
Dear sir
Please,send my more information for wood moisture measurement and methods of wood moisture measuring.


 
 Reply 
 
Joseph Pascente
Engineering
Lixi, Inc., USA, Joined Nov 1998, 39

Joseph Pascente

Engineering
Lixi, Inc.,
USA,
Joined Nov 1998
39
06:14 Apr-29-2001
Wood moisture measurement
The Lixi Profiler will measure moisture amount in wood
whose thickness is the same.



 
 Reply 
 
nazmi yetim
nazmi yetim
07:04 Apr-12-2002
Re: Wood moisture measurement
: Dear sir
: Please,send my more information for wood moisture measurement and methods of wood moisture measuring.
.b



 
 Reply 
 
N.T. Azarov
Engineering
GosNIIGA, Russia, Joined Jan 2000, 12

N.T. Azarov

Engineering
GosNIIGA,
Russia,
Joined Jan 2000
12
07:19 Apr-14-2002
Re: Wood moisture measurement
: : Dear sir
: : Please,send my more information for wood moisture measurement and methods of wood moisture measuring.
: .b
.


Dear sir.
We develop a meter of humidity of wood by a capacity method - "humidity meter VD-1". The instrument allows to measure of relative (%) humidity of wood on depth up to 30-40mm, while other similar instruments measure humidity only in surface layers. The instrument has the switch, depending on a type of a tree.
Nowadays instrument is used by us for definition of presence of a moisture in aircraft honeycomb constructions from composite materials.
The instrument is portable, mass 200g. The power supply is carried out from the accumulator.



 
 Reply 
 

Product Spotlight

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window