where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

2674 views
Technical Discussions
ashraf samir
NDT Inspector
petrojet, Egypt, Joined Apr 2001, 2

ashraf samir

NDT Inspector
petrojet,
Egypt,
Joined Apr 2001
2
01:39 Apr-29-2001
what is lack of cross penetration lack of inter-run fusion

what is lack of inter-run fusion and lack of cross penetration in semi auto GTAW , what is the difference between it and cold lap and lack of side wall fushion .


 
 Reply 
 
Anonymous
Anonymous
03:37 Apr-29-2001
Re: what is lack of cross penetration lack of inter-run fusion
: what is lack of inter-run fusion and lack of cross penetration in semi auto GTAW , what is the difference between it and cold lap and lack of side wall fushion .
.
Sorry, I first posted this under the wrong subject. However, the main difference between inter-run fusuion, lack of cross penetration, cold lap and side wall fusion is "location in the weld". Lack of cross pen occurs when welding the root internally and the hot pass externally. If you do not get adequate penetration with your hot pass, you will get lack of cross penetration. Cold lap, side wall and inter-run fusion occur from inadequate heat input or improper welding technique.


 
 Reply 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

VOGT Ultrasonics awarded innovation champion

Let go of the old and try something new. VOGT convinced the jury in the 27th round of the TOP 100
...
innovation competition. Our team is very pleased to officially belong to the TOP 100 in Germany!
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window