where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Zawada NDT
Suppliers of instruments to test steel wire ropes in-situ, using magnetic, non-destructive method.
543 views
Technical Discussions
Nick Welland
Nick Welland
09:09 Dec-05-2000
Positive Material Identification

I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.
Instrumentation could be XRF or OES; must be portable and economical.
Regards
Nick Welland


 
 Reply 
 
Guido Crapels
Guido Crapels
09:20 Dec-05-2000
Re: Positive Material Identification



 
 Reply 
 
Guido Crapels
Guido Crapels
01:15 Dec-05-2000
Re: Positive Material Identification



 
 Reply 
 
Peter Faulkner
Peter Faulkner
03:06 May-01-2001
Re: Positive Material Identification
: I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.
: Instrumentation could be XRF or OES; must be portable and economical.
: Regards
: Nick Welland

Have you been successful with your search yet?
WE at Niton UK can offer both XRF and OES usually ex demo units available periodically
Peter Faulkner


 
 Reply 
 
p.saniee
p.saniee
09:34 Jul-18-2001
Re: Positive Material Identification
: : I am looking for suppliers of equipment for positive material identification of metals, principally stainless steels.

best regards
saniee


 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

Customized Probes and Transducers

With a strong development department and our own piezocomposite production, we accompany you from th
...
e first product idea to serial production. Our scientists are continuously researching new methods in the field of ultrasonic measurement technology. The progress achieved enables us to offer you optimal solutions.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window