where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Canadian Institute for NDE
We are specialized in training for Radiography, Ultrasonics, Magnetic Particle, Liquid Penetrant, Eddy Current and emerging NDT technologies.

507 views
Technical Discussions
XU Bingzhang
XU Bingzhang
08:41 Jan-05-1997
PC Computer Based NDT Device

Hi, Hello

We want to establish a NDT device, but I can't find
Where can we get the PC computer based NDT Device.
Would you please tell us the type,specification, and
the price?


    
 
 
Dr. Wolfgang Hillger
Engineering
Ing.Büro/DLR, Germany, Joined Nov 1998, 5

Dr. Wolfgang Hillger

Engineering
Ing.Büro/DLR,
Germany,
Joined Nov 1998
5
08:23 Jan-24-1997
Re: PC Computer Based NDT Device
We have developed PC-Bords for UT-testing for all
materials (also such with high sound damping) called
HILL-SCAN 30xx. There is also a Software for A-, B-
and C- and D-scans (ultrasonic imaging).
Ingenierbüro Dr. Hillger
Wilhelm-Raabe-Weg 13, D- 38110 Braunschweig, Germany
Fax: +49 5307 5734




    
 
 

Product Spotlight

YXLON Cougar EVO

Scalable small footprint X-ray inspection systems for assembly and laboratory applications. The
...
YXLON Cougar EVO series was designed to provide the "best-in- class" inspection solutions for SMT, semiconductor, and laboratory assembly applications, while maintaining a small system footprint for maximum convenience. With optimized software and hardware, these systems produce higher quality and more consistent results than other electronics inspection systems currently on the market.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window