where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
685 views
Technical Discussions
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 609

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
609
00:44 May-12-1997
Model generated by an inverse Fast Fourier Transformation

Concerning the article "Approximative Modeling for the Practical Ultrasonic Inspections" by H.Wüstenberg, A.Erhard.
The A-Scans are in the model generated by an inverse Fast Fourier Transformation.
What are the advantages and drawbacks of this approach?

Rolf Diederichs



 
 Reply 
 
Hermann Wuestenberg
R & D
BAM Berlin, Germany, Joined Nov 1998, 26

Hermann Wuestenberg

R & D
BAM Berlin,
Germany,
Joined Nov 1998
26
06:37 May-16-1997
Re: Model generated by an inverse Fast Fourier Transformation
: Concerning the article "Approximative Modeling for the Practical Ultrasonic Inspections" by H.Wüstenberg, A.Erhard.
: The A-Scans are in the model generated by an inverse Fast Fourier Transformation.
: What are the advantages and drawbacks of this approach?

: Rolf Diederichs


Pleas find here an first attempt of answering the following question:

1. The model can be linked to well known pulse spectra of UT-probes,
which commonly are available as data measured and also - depending
from the manufacturer - calculated by a KLM-quadrupol model or
similar equivalent circuits for the probe. The influence of the
bandpass filter characteristic of the receiving amplifier within the
UT-equipment can easely be studied.

2. The phase behaviour of reflection or mode conversion factors and of
the point source directivities for the different wave modes and its
influence can be considered without any difficulty

3. This enables us to cut the totality of the process into different
parts and to multiply or add them in order to get the transfer
function of the whole system.

4. The necessary number of frequency samples to be calculated can be
adapted to the extension of the time domain to be considered for the
A-Scan. E.g. many of the examples in the above mentioned contribution
are using 64 samples in the frequeny domain and 128 in the time
domain, which corresponds e.g. to 16 mm sound path length. That means
that the use of the inverse FFT enables us to reach very short
computational times.


The drawbacks have to listed by someone else favorising a time domain
approach.

greetings

and Frohe Pfingsten

Hermann Wuestenberg



 
 Reply 
 

Product Spotlight

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

NOVO Armor 15 & NOVO Armor 22

The Armor Kit Contains the NOVO Armor, which provides additional mechanical protection to the NOVO 1
...
5WN & NOVO 22WN Detectors, the Armor Stand and a traveling soft cover. - Newest shock absorbent technology case - Water resistant design - Supports wired & wireless communication - Multiple positioning options - Tripod connection using the Built-in 1/4” threads - Simple Detector battery replacement
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window