where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

1668 views
Technical Discussions
Dipl-Ing. Christoph Müller
Consultant, Process Validation
Austria, Joined May 2001, 1

Dipl-Ing. Christoph Müller

Consultant, Process Validation
Austria,
Joined May 2001
1
05:23 May-09-2001
Bubble detection in high-viscous gel

We have the problem of air bubbles in a high-viscous gel used for in-vitro diagnostics. The gel is under pressure and flowing very slowly through a metallic pipe of about 30 mm in diameter.

Is there a possibility to detect these air bubbles with ultrasonic-equipment. Asking for help/contacts.

Christoph Müller


 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
05:37 May-09-2001
Re: Bubble detection in high-viscous gel
: We have the problem of air bubbles in a high-viscous gel used for in-vitro diagnostics. The gel is under pressure and flowing very slowly through a metallic pipe of about 30 mm in diameter.
.
: Is there a possibility to detect these air bubbles with ultrasonic-equipment. Asking for help/contacts.

You didn't indicate the size of the bubbles, but assuming that they are on the order of one-half millimeter in diameter or larger, it should be possible to detect them with conventional ultrasinic equipment. However, assuming also that they may occur anywhere in the 30 mm diameter stream, it will be necessary to use a number of transducers and multiple instrumentation channels to comprehensively inspect 100% of the gel volume. So yes, your proposed test is probably possible with a multi-channel system.

The Panametrics affiliate in Austria is Panametrics Messtechnik GmbH. You will find a link to them on our home page at .

--Tom Nelligan



 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
06:10 May-09-2001
Re: Bubble detection in high-viscous gel
: We have the problem of air bubbles in a high-viscous gel used for in-vitro diagnostics. The gel is under pressure and flowing very slowly through a metallic pipe of about 30 mm in diameter.
.
: Is there a possibility to detect these air bubbles with ultrasonic-equipment. Asking for help/contacts.
.
: Christoph Müller
.We have sold the system to many univeristy where they are studying air bubbles and particles. The frequency selection is important. Yes they are measuring both the number of particles and also tracking the particles within the beam of transducer. The software comes with the system and some other group has also tried in latex materials. Thus, it is possible with single channel or dual channel system. One can measure the attenuation and velocity and second channel will measure the counts of particles within the selected region and track the particles. We need following information
1. What is the attenuation in the gel
2. The bubble size
3. This allow us to configure the system power and sensor frequency

Regards

Dr. Patel



 
 Reply 
 
Wieslaw Bicz
Engineering,
PBP Optel sp. z o.o., Poland, Joined Feb 2009, 276

Wieslaw Bicz

Engineering,
PBP Optel sp. z o.o.,
Poland,
Joined Feb 2009
276
07:13 May-09-2001
Re: Bubble detection in high-viscous gel
: We have the problem of air bubbles in a high-viscous gel used for in-vitro diagnostics. The gel is under pressure and flowing very slowly through a metallic pipe of about 30 mm in diameter.
.
: Is there a possibility to detect these air bubbles with ultrasonic-equipment. Asking for help/contacts.
.
: Christoph Müller
.
May be it would be better to remove this bubbles. In this case it would be possible to do it with ultrasound and it could be very effective.
If you are interested, we can help in implementing this solution.


 
 Reply 
 
jean paul van Cuyck
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

jean paul van Cuyck

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
04:07 May-10-2001
Re: Bubble detection in high-viscous gel
: We have the problem of air bubbles in a high-viscous gel used for in-vitro diagnostics. The gel is under pressure and flowing very slowly through a metallic pipe of about 30 mm in diameter.
.
: Is there a possibility to detect these air bubbles with ultrasonic-equipment. Asking for help/contacts.
.
: Christoph Müller
.

Conceptually yes.

In fact the aim problem is to find the compromise between the buble size, frequency resolution and sound attenuation.
You can even try to use the buble resonance frequency. It depend on the medium and the viscosity.

I have worked on the sound propagation through particle cloud (buble, plankton, mineral particle).
I could help you if you need.


 
 Reply 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Portable Ground Penetrating Radar - Proceq GP8000

The Proceq GP8000 portable ground penetrating radar instrument is the beginning of a new era in ND
...
T. The outstanding, patented ultra- wideband technology combined with a compact wireless probe delivers unmatched industry performance. Proceq GP8000 is the world’s first large-scale inspection solution that utilizes Augmented Reality in industrial applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window