where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

740 views
Technical Discussions
Mindaugas
Student, - -
Kaunas University of Technology, Lithuania, Joined May 2001, 1

Mindaugas

Student, - -
Kaunas University of Technology,
Lithuania,
Joined May 2001
1
07:27 May-09-2001
Calibration of acoustic emission tranducer

Hi,

I am looking information about methods of acoustic emission transducer calibration.


Mindaugas


    
 
 
Dr. Sotirios J. Vahaviolos
R & D, -
MISTRAS Group, Inc., USA, Joined Jan 2000, 15

Dr. Sotirios J. Vahaviolos

R & D, -
MISTRAS Group, Inc.,
USA,
Joined Jan 2000
15
08:17 May-09-2001
Re: Calibration of acoustic emission tranducer
: Hi,
.
: I am looking information about methods of acoustic emission transducer calibration.
.
:
: Mindaugas

Dear Mr. Mindaugas
There are 3-ASTM(1106 Primary Calibration,Secondary Calibration and Reproducibility
of Sensor Response)standards 1-JNDI(Reciprocity Standard) and 1-ISO new standard
that is really USA's Reciprocity Standard.
Physical Acoustics Corporation supplies these calibrations with every AE sensor we
make and we will be delighted to discuss this further.Additionally, the Institute of
Acoustic Emission in Paris France is in the final stages of obtaining the necessary
licenses to do the same types of calibration that are traceable to NIST and thus, ISO.
New Russian company diaPAC Ltd. will have soon the same capabilities.
Sotirios Vahaviolos,Ph.D.


    
 
 
Udo Schlengermann
Consultant, -
Standards Consulting, Germany, Joined Nov 1998, 176

Udo Schlengermann

Consultant, -
Standards Consulting,
Germany,
Joined Nov 1998
176
08:51 May-10-2001
Re: Calibration of acoustic emission tranducer
reply by Udo Schlengermann :

There are 3 European Standards on Acoustic Emission:
EN 13477-1: Equipment description
EN 13477-2: Verification of operation characteristics
EN 13554: General principles

Kind regards
Udo Schlengermann
+++++

: Hi,
.
: I am looking information about methods of acoustic emission transducer calibration.
.
:
: Mindaugas
.



    
 
 

Product Spotlight

Compact NDT inspection-heads for measurements with active thermography

The compact inspection head is suitable for thermographic ndt tasks. The uncooled infrared camera
...
is specially developed for NDI-tasks and offers a thermal sensitivity until now known only from thermal imagers with cooled detector. All required components and functions are integrated into the inspection-head. You will only need an ethernet cable to connect the sensor with the evaluation system.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window