where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

879 views
Technical Discussions
elgazery
Consultant
National Institute for Standards, Egypt, Joined May 2003, 10

elgazery

Consultant
National Institute for Standards,
Egypt,
Joined May 2003
10
01:28 May-11-2001
Difference between dB and dBM

Please
there are any one can discuss me the difference between dB and dBM units for measurement attenuation.
Thank you in advance.
looking forward to recieve your valuable discussion.
elgazery@sit.nis.sci.eg


    
 
 
jean paul van Cuyck
Director
A2MS, Applied Acoustics, Materials and Systems, France, Joined Nov 1998, 13

jean paul van Cuyck

Director
A2MS, Applied Acoustics, Materials and Systems,
France,
Joined Nov 1998
13
04:16 May-11-2001
Re: Difference between dB and dBM
: Please
: there are any one can discuss me the difference between dB and dBM units for measurement attenuation.
: Thank you in advance.
: looking forward to recieve your valuable discussion.
: elgazery@sit.nis.sci.eg
.
dB or dBW relativ to 1W
dBm for dB relativ to 1 milliwatt. 0 dBm= 1 mW = -30dBW



    
 
 
Dr. Sotirios J. Vahaviolos
R & D, -
MISTRAS Group, Inc., USA, Joined Jan 2000, 15

Dr. Sotirios J. Vahaviolos

R & D, -
MISTRAS Group, Inc.,
USA,
Joined Jan 2000
15
05:43 May-11-2001
Re: Difference between dB and dBM
: : Please
: : there are any one can discuss me the difference between dB and dBM units for measurement attenuation.
: : Thank you in advance.
: : looking forward to recieve your valuable discussion.
: : elgazery@sit.nis.sci.eg
: .
: dB or dBW relativ to 1W
: dBm for dB relativ to 1 milliwatt. 0 dBm= 1 mW = -30dBW
.
Dear Mr.Elgazery
Its interesting,but these terms are used interchangeably at times, erroneously.The term dBm is used by
communications engineers and it is absolute.Most Power meters commercially available have this scale.
It is : dBm=10log(base 10)(P1/P2) at two different Power points.Power is read always across a 50 Ohm
resistor.IEEE has made this a standard and 1mW=0dBm(-40dBm is 100nW accross 50 Ohm and +20dBm is 100mW).
As far as I know dB(not DB)refers simly to gain(and loss/attenuation as -dB).It is different this time
as the equation is not Power but a simple ratio: dB=20log(base 10)(Gain or attenuation).One can have
a reference and above that reference he is talking in positive dBs(Gain) and below in negative dBs(loss
or attenuation).Such scales can then be modified as we have done for Acoustic Emission where we talk in
dBae and our refence is the "perfect" sensor giving us ONLY 1microVolt(!) Peak output noise.Anyway a
good goal.So for 40dBae a sensor/Amplifier(40dB Gain)output across a 50 Ohm resistor is 10mV.
Sotirios



    
 
 

Product Spotlight

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window