where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

IMG ULTRASUONI SRL
Ultrasonic transducers for industrial applications (NDT) and medical (Doppler effect). Probes, Ultrasonic instruments, Special systems for NDT.
1985 views
Technical Discussions
velu
velu
15:45 Feb-09-2009
ut below 5 mm

hi to all,
i have dout about below 5mm thickness we can do ut or not?

 
 Reply 
 
Manfred
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 31

Manfred

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
31
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Please give more details. Material, welds, forging ...

 
 Reply 
 
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Velu,

You must give more information about what you are trying to do. UT below 5mm is a pretty broad statement. Are you trying to do 0 degree or angle beam inspection? Please let us know more about exactly what you are trying to accomplish and we can help you with our comments.

Jamie

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
07:16 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I am also highly interested in this subject as. I also have cast steel pipeline network: wall thickness from 4mm to 13mm in 6", 8", 12", 16", 18" & 20".
My immediate concern is the 12" pipe, thickness between 6,35mm and 8mm, I want to locate and size planar anomalies (incl cracks, lack of fusion, etc) in the longitudinal seam weld and heat affected zone; in surface, sub-surface & internal wall.
I do this to verify events pointed out by in-line inspection surveys (pigging). the seam weld is ERW of pre-1970. I normally insist on both a zero & an angle probe.
Velu and I are anxiously awaiting your responses.

 
 Reply 
 
kutty
kutty
09:00 Feb-10-2009
Re: ut below 5 mm
In Reply to Sibusiso Mzila at 07:16 Feb-10-2009 .

hi

what are the aspects to we should concentrat while scaning in both(angle&0) probe in below 8mm thickness.

1. in pipe
2. in plate
3. in both weld

nilson

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
10:14 Feb-10-2009
Re: ut below 5 mm
In Reply to kutty at 09:00 Feb-10-2009 .

Hi Nilson,

I am not sure I understand your question, it is 100% scanning of discontinuities or material losses on the longitudinal seam weld (LSW) and 1 inch either side of the LSW.

Stix

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
11:42 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I know you are getting and are going to get many more responses. I can only answer you in broad terms right now - the answer is yes. We were doing UT of very thin plates and tubes, right upto 0.4 mm and we can go down futher if needed. I am talking of tubes, sheets and welds in zirconium alloys, titanium, austenitic stainless steel etc. for various applications.

Pl. feel free to contact with more details. I can help you if you have the right equipment.

Swamy

 
 Reply 
 
Rafal
Sales, - Technical Support
Olympus Poland, Poland, Joined Sep 2008, 12

Rafal

Sales, - Technical Support
Olympus Poland,
Poland,
Joined Sep 2008
12
13:46 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

The answer for simple question: "Can we do UT below 8mm?" is YES. We have been performing that kind of testing for over 20 years now. Also Polish power industry is using this method. (method is described in article from ECNDT 2006 http://www.ndt.net/search/abstract.php3?AbsID=4071 ).
Anyone feel free to contact me for more informations...

 
 Reply 
 

Product Spotlight

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

SITEX CPSERIES

Teledyne ICM’s CPSERIES has been designed with a view to revolutionizing the handling and perfor
...
mances of portable X-Ray sets. Despite having managed to halve the weight of similar portable X-Ray generators available on the market (while continuing to provide the same power output), the SITEX CPSERIES generators feature a shutter, a laser pointer, a beryllium window, an aluminum filter and two integrated diaphragms (customized sizes are available upon request). Without compromising the robustness and reliability for which ICM products are renowned, the small size and light weight of the SITEX CPSERIES will radically change the way that you perform your RT inspections. And you will see a positive impact in terms of both quality and return on investment (ROI).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window