where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1980 views
Technical Discussions
velu
velu
15:45 Feb-09-2009
ut below 5 mm

hi to all,
i have dout about below 5mm thickness we can do ut or not?

 
 Reply 
 
Manfred
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 31

Manfred

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
31
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Please give more details. Material, welds, forging ...

 
 Reply 
 
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Velu,

You must give more information about what you are trying to do. UT below 5mm is a pretty broad statement. Are you trying to do 0 degree or angle beam inspection? Please let us know more about exactly what you are trying to accomplish and we can help you with our comments.

Jamie

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
07:16 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I am also highly interested in this subject as. I also have cast steel pipeline network: wall thickness from 4mm to 13mm in 6", 8", 12", 16", 18" & 20".
My immediate concern is the 12" pipe, thickness between 6,35mm and 8mm, I want to locate and size planar anomalies (incl cracks, lack of fusion, etc) in the longitudinal seam weld and heat affected zone; in surface, sub-surface & internal wall.
I do this to verify events pointed out by in-line inspection surveys (pigging). the seam weld is ERW of pre-1970. I normally insist on both a zero & an angle probe.
Velu and I are anxiously awaiting your responses.

 
 Reply 
 
kutty
kutty
09:00 Feb-10-2009
Re: ut below 5 mm
In Reply to Sibusiso Mzila at 07:16 Feb-10-2009 .

hi

what are the aspects to we should concentrat while scaning in both(angle&0) probe in below 8mm thickness.

1. in pipe
2. in plate
3. in both weld

nilson

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
10:14 Feb-10-2009
Re: ut below 5 mm
In Reply to kutty at 09:00 Feb-10-2009 .

Hi Nilson,

I am not sure I understand your question, it is 100% scanning of discontinuities or material losses on the longitudinal seam weld (LSW) and 1 inch either side of the LSW.

Stix

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
11:42 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I know you are getting and are going to get many more responses. I can only answer you in broad terms right now - the answer is yes. We were doing UT of very thin plates and tubes, right upto 0.4 mm and we can go down futher if needed. I am talking of tubes, sheets and welds in zirconium alloys, titanium, austenitic stainless steel etc. for various applications.

Pl. feel free to contact with more details. I can help you if you have the right equipment.

Swamy

 
 Reply 
 
Rafal
Sales, - Technical Support
Olympus Poland, Poland, Joined Sep 2008, 12

Rafal

Sales, - Technical Support
Olympus Poland,
Poland,
Joined Sep 2008
12
13:46 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

The answer for simple question: "Can we do UT below 8mm?" is YES. We have been performing that kind of testing for over 20 years now. Also Polish power industry is using this method. (method is described in article from ECNDT 2006 http://www.ndt.net/search/abstract.php3?AbsID=4071 ).
Anyone feel free to contact me for more informations...

 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window