where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1977 views
Technical Discussions
velu
velu
15:45 Feb-09-2009
ut below 5 mm

hi to all,
i have dout about below 5mm thickness we can do ut or not?

 
 Reply 
 
Manfred
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 31

Manfred

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
31
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Please give more details. Material, welds, forging ...

 
 Reply 
 
James Gauthier
Engineering,
ABB, Inc., USA, Joined Nov 2007, 25

James Gauthier

Engineering,
ABB, Inc.,
USA,
Joined Nov 2007
25
16:20 Feb-09-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

Velu,

You must give more information about what you are trying to do. UT below 5mm is a pretty broad statement. Are you trying to do 0 degree or angle beam inspection? Please let us know more about exactly what you are trying to accomplish and we can help you with our comments.

Jamie

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
07:16 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I am also highly interested in this subject as. I also have cast steel pipeline network: wall thickness from 4mm to 13mm in 6", 8", 12", 16", 18" & 20".
My immediate concern is the 12" pipe, thickness between 6,35mm and 8mm, I want to locate and size planar anomalies (incl cracks, lack of fusion, etc) in the longitudinal seam weld and heat affected zone; in surface, sub-surface & internal wall.
I do this to verify events pointed out by in-line inspection surveys (pigging). the seam weld is ERW of pre-1970. I normally insist on both a zero & an angle probe.
Velu and I are anxiously awaiting your responses.

 
 Reply 
 
kutty
kutty
09:00 Feb-10-2009
Re: ut below 5 mm
In Reply to Sibusiso Mzila at 07:16 Feb-10-2009 .

hi

what are the aspects to we should concentrat while scaning in both(angle&0) probe in below 8mm thickness.

1. in pipe
2. in plate
3. in both weld

nilson

 
 Reply 
 
Sibusiso Mzila
Engineering, Pipeline integrity
Transnet SOC Limited, South Africa, Joined May 2004, 13

Sibusiso Mzila

Engineering, Pipeline integrity
Transnet SOC Limited,
South Africa,
Joined May 2004
13
10:14 Feb-10-2009
Re: ut below 5 mm
In Reply to kutty at 09:00 Feb-10-2009 .

Hi Nilson,

I am not sure I understand your question, it is 100% scanning of discontinuities or material losses on the longitudinal seam weld (LSW) and 1 inch either side of the LSW.

Stix

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
11:42 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

I know you are getting and are going to get many more responses. I can only answer you in broad terms right now - the answer is yes. We were doing UT of very thin plates and tubes, right upto 0.4 mm and we can go down futher if needed. I am talking of tubes, sheets and welds in zirconium alloys, titanium, austenitic stainless steel etc. for various applications.

Pl. feel free to contact with more details. I can help you if you have the right equipment.

Swamy

 
 Reply 
 
Rafal
Sales, - Technical Support
Olympus Poland, Poland, Joined Sep 2008, 12

Rafal

Sales, - Technical Support
Olympus Poland,
Poland,
Joined Sep 2008
12
13:46 Feb-10-2009
Re: ut below 5 mm
In Reply to velu at 15:45 Feb-09-2009 (Opening).

The answer for simple question: "Can we do UT below 8mm?" is YES. We have been performing that kind of testing for over 20 years now. Also Polish power industry is using this method. (method is described in article from ECNDT 2006 http://www.ndt.net/search/abstract.php3?AbsID=4071 ).
Anyone feel free to contact me for more informations...

 
 Reply 
 

Product Spotlight

Ultrasonic Testing Immersion Tanks with Unmatched Scanning Features

TecScan’s non-destructive testing Ultrasonic Immersion Tanks & scanners are designed for high pe
...
rformance and demanding NDT testing applications. Our Scan3D™ line of High Precision Immersion Tanks are specifically designed for automated ultrasonic testing of complex composites parts used in aerospace and industrial applications.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window