where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Iris Inspection Services, Inc.
We are the world's largest supplier of air cooler, boiler and exchanger tubing inspection services.

1014 views
Career Discussions
Abbas Bombaywala
NDT Inspector
Free Lance, India, Joined Jul 2007, 93

Abbas Bombaywala

NDT Inspector
Free Lance,
India,
Joined Jul 2007
93
12:38 Feb-10-2009
Information regarding getting pictures off all NDT stuffs

If anyone can advise me any good site from where i can download the pictures of NDT stuff like Radiography instruments and UT & Eddy current Instruments and accessories.

i would be highly obliged

Regards

 
 Reply 
 
Peter
Peter
07:20 Feb-11-2009
Re: Information regarding getting pictures off all NDT stuffs
In Reply to Abbas Bombaywala at 12:38 Feb-10-2009 (Opening).

I think this link will be good www.ndts.net

Regards

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
11:05 Feb-11-2009
Re: Information regarding getting pictures off all NDT stuffs
In Reply to Abbas Bombaywala at 12:38 Feb-10-2009 (Opening).

The internet will have a good number of photos. This website itself has an exhibitor's stand where almost all NDT manufacturers of different NDT equipment have their stands. If your use is non-commercial, they will be happy to share the photos with you. They may allow you to use their photos even for commercial purposes but that needs to be discussed with them.

Best wishes.

Swamy
NDT Guru

 
 Reply 
 
Abbas Zoher Bombaywala
NDT Inspector
Free Lance, India, Joined Jul 2007, 93

Abbas Zoher Bombaywala

NDT Inspector
Free Lance,
India,
Joined Jul 2007
93
12:12 Feb-11-2009
Re: Information regarding getting pictures off all NDT stuffs
In Reply to S.V.Swamy at 11:05 Feb-11-2009 .

Dear Sir,

I just want to create a software for our logistic and adminstrative personnel in which we will indent something for our use and when they will click on that items they get the picture of that and they can come to know that this is the thing which they need to purchase.

Thanks

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
02:27 Feb-14-2009
Re: Information regarding getting pictures off all NDT stuffs
In Reply to Abbas Zoher Bombaywala at 12:12 Feb-11-2009 .

Dear Abbas,

Unless your company's purchase system allows it, the purchaser of any organization is expected to specify generic items and not proprietary items. Every item has a code number and a description of the item and specifications in the database, that is used by indentor, purchase, stores etc. If your organization has gone in for standardization, a few approved vendors and the item codes for their products will be there in the database. Thus spares would be proprietary and equipments and consumables would be from a few approved vendors. For example, if an ultrasonic flaw detector is to be indented, you would get a few choices from different vendors, but if you were to order a probe for an existing flaw detector, it would be from the product line of that specific vendor. Using photograph of another vendor could lead to serious problems.

I would recommend that the existing items are photographed using a simple digital camera and the images uploaded to the database. Provision for user to add images later can be made so that when new items are added to the database, images could be uploaded by the user.

 
 Reply 
 

Product Spotlight

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

Ultrasonic Probe Recharacterization Service

NDT Systems offers a comprehensive Aftercare and Recharacterization Service for all our ultrasonic
...
probes. The Recharacterization Service is fully compliant with International ASTM E1065 Standard Guide (and other applicable standards) and offers complete documentation, traceable to the ASTM E1065 Standard. For more details or to schedule Recharacterization Services contact ndtsales@ndtsystems.com
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window