where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
556 views
Technical Discussions
Atul Deulgaonkar
Atul Deulgaonkar
07:44 May-19-2001
Ultrasonic testing of forged shaft

While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
What is interpretation of this phenomenon ?


 
 Reply 
 
Anonymous
Anonymous
01:27 May-19-2001
Re: Ultrasonic testing of forged shaft
: While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
: What is interpretation of this phenomenon ?
.
Try various Pulse Repitition Rates and a 2.25 MHz. Transducer.


 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
06:44 May-19-2001
Re: Ultrasonic testing of forged shaft
: : While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
: : What is interpretation of this phenomenon ?
: .
: Try various Pulse Repitition Rates and a 2.25 MHz. Transducer.

There are many reasons for that and if you can send us details on probe diameter and contact face, PRF and energy on your pulser, perhaps we can help you interprete the phenomenon. Beam divergence, contact losses, losses due to material properties etc plays a role, however, first we have to establish the sensor and instrument you are using is OK than we can deal with other problems.

Regards

Dr. Patel



 
 Reply 
 

Product Spotlight

Teletest Focus+

Teletest Focus+ electronics have superior capabilities than rivals on the market. Beyond the usual
...
test features, Focus+ has 24 transmit channels and 24 receive channels, with an additional on-board switching capabilities. The instrument's frequency range is 10–300 kHz.
>

A1525 SOLO

A1525 Solo – the most compact and affordable TMF unit with two phased array transducers and 3D v
...
isualization and analysis software in standard delivery set. A compact, ergonomic and easy to handheld Phased Array unit based on Total Focusing Method for easy-going imaging of inspection objects with two-dimensional and three-dimensional visualization and evaluation of inspection results.
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Magnetic X-Ray Pipeline Crawler

Zhong Yi brand pipeline crawler is magnetic/micro-video controlled crawler with DC X ray unit inst
...
alled for checking welding of pipeline. Move steadily inside the pipeline 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometers and provide the efficient inspection of the pipeline.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window