where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
555 views
Technical Discussions
Atul Deulgaonkar
Atul Deulgaonkar
07:44 May-19-2001
Ultrasonic testing of forged shaft

While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
What is interpretation of this phenomenon ?


 
 Reply 
 
Anonymous
Anonymous
01:27 May-19-2001
Re: Ultrasonic testing of forged shaft
: While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
: What is interpretation of this phenomenon ?
.
Try various Pulse Repitition Rates and a 2.25 MHz. Transducer.


 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
06:44 May-19-2001
Re: Ultrasonic testing of forged shaft
: : While testing it is observed a number of times that shafts do not give any back wall echo even at full gain and using probes of very low fequencies like 1Mhz or 0.5Mhz.
: : What is interpretation of this phenomenon ?
: .
: Try various Pulse Repitition Rates and a 2.25 MHz. Transducer.

There are many reasons for that and if you can send us details on probe diameter and contact face, PRF and energy on your pulser, perhaps we can help you interprete the phenomenon. Beam divergence, contact losses, losses due to material properties etc plays a role, however, first we have to establish the sensor and instrument you are using is OK than we can deal with other problems.

Regards

Dr. Patel



 
 Reply 
 

Product Spotlight

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window