where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
598 views
Technical Discussions
Jane Guo
Jane Guo
03:41 May-23-2001
multi-position arm & pipe-o-Crawler

We are looking for
pipeline-o-crawler which can be used on 16¡¨~20¡¨£¬22¡¨-24¡¨32¡¨-36¡¨40¡¨-44¡¨steel helix external pipeline,misregistration<10mm per veer and speed between 0-1m(can be adjustable).
multi-position arm
max inspection height:3.5m(can be adjustable)
X-ray tube:225Kv
Number of modular section:2




 
 Reply 
 
Ian Huff
Ian Huff
04:21 May-23-2001
Re: multi-position arm & pipe-o-Crawler
: We are looking for
: pipeline-o-crawler which can be used on 16¡¨~20¡¨£¬22¡¨-24¡¨32¡¨-36¡¨40¡¨-44¡¨steel helix external pipeline,misregistration<10mm per veer and speed between 0-1m(can be adjustable).
: multi-position arm
: max inspection height:3.5m(can be adjustable)
: X-ray tube:225Kv
: Number of modular section:2
:
.Refer to Oceaneering web site re. Solus Schall pipeline crawlers. Please e-mail me with more explicit
information.
Ian Huff
Pipeline Inspection Manager
Asia Pacific



 
 Reply 
 
Christoph Schnitger ( TCP Prüftechnik GmbH )
Christoph Schnitger ( TCP Prüftechnik GmbH )
05:30 May-23-2001
Re: multi-position arm & pipe-o-Crawler
Dear Jane,

you will receive an official offer for an pipeline
crawler from my side !!

If you are looking for new or used equipment in the
following methods ( RT ; UT ; MPT or PT ) i am sure
i can help you.

Do not hesitate to contact us !!

C.Schnitger


 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Conformable wedge transducer

The conformability is obtained with a flexible membrane filled with water between the transducer and
...
the inspected component. The coupling between the membrane and the component requires a small quantity of water or couplant. The conformable wedge combines the acoustic performance of immersion technique with good coupling and low attenuation.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window