where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Ultrasonic Sciences Ltd
We specialize in the design and manufacture of automated and semi-automated ultrasonic testing systems, including multi axis, multi channels systems and phased array electronics.
1163 views
Technical Discussions
Jaga
Jaga
03:24 Feb-19-2009
Does Phasor XS(Phase Array) code compliace to ASME CC2235-9

Dear All,

Does Phasor XS code compliance to CC2235-9?As far I concern,this unit incompatible to execute sector scan(B-scan) with encoder to record out the scan.In short,we can't acquire recordable executed scan(side view) or even can't record defect size length.And in order to execute defect sizing,we need to do it manually by using manual UT probe. Does this attributes can comply ASME CC2235-9 in lieu of radigraphy?Please advice and correct me if I'm wrong.Thanks.

 
 Reply 
 
Manfred Richter
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 31

Manfred Richter

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
31
14:47 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

Jaga,
recently GE upgrade the phasor, and it possible to acquire encoded data now . The new ones was demonstrated for our company.

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
23:17 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

The original Phasor could not meet the requirements and GE quickly became aware of that. they have upgraded now and you should be able to achieve it with the new units. Talk to your GE rep.

Regards

 
 Reply 
 
Jaga
Jaga
03:29 Feb-21-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to John O'Brien at 23:17 Feb-20-2009 .

Dear All,
Thanks for your speedy response.As far I concern,encoded inspection with the Phasor XS is only possible in CScan mode(Top view).The C-Scan is uncorrected and doesn't portray the correct view ,to carry out defect sizing base on the C scan view.Still need to carry out manual sizing by using conventional UT technique.From this findings, I assume the phasor XS still can't comply CC2235-9.Please advice and correct me if I'm wrong. Thanks a lot.

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

High-end Ultrasonic Flaw Detector with 32:128PR PAUT and 2-ch TOFD: SyncScan 2

SIUI’s newly launched SyncScan 2, is a high-end ultrasonic flaw detector with 32:128PR PAUT and
...
2-ch TOFD, which can maximize your efficiency for PA and TOFD. ● Support PA/TOFD/UT ● 32-ch PA is more suitable for inspection on extra-thick wall and high-attenuation material. ● 32-ch PA and 2-ch TOFD work simultaneously. ● Support PR mode for corrosion inspection.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window