where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
690 views
Technical Discussions
AJIT PAWAR
Engineering, Inspector
V.J.T.I., India, Joined Feb 2009, 8

AJIT PAWAR

Engineering, Inspector
V.J.T.I.,
India,
Joined Feb 2009
8
12:07 Feb-19-2009
DAC

What is mean by DAC curve & FBH in UT ?

 
 Reply 
 
Paul Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
12:33 Feb-19-2009
Re: DAC
In Reply to AJIT PAWAR at 12:07 Feb-19-2009 (Opening).

FBH means "Flat Bottom Hole", which is a standard reference reflector used in ultrasonic testing. When an actual defect is detected, the amplitude of its reflected echo is compared to echos of flat bottom holes of various diameters. This gives some indication of the size of the defect.
But the sound field from a UT probe spreads as it propagates, decreasing in intensity. Also, reflections from defects spread on their travel back to the probe. Therefore, as a defect moves farther from the UT probe, its echo amplitude decreases. In order to maintain some correlation between the defect echo amplitude and the size of a defect, a correction must be made for the distance between the probe and the defect. This is a DAC, or Distance Amplitude Correction. The DAC is a function of the probe and defect characteristics. Therefore, the FBH (Flat Bottom Hole) is used for reference, and a DAC is developed for the probe characteristics being used.
I hope this helps,
Paul

 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window