where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

700 views
Technical Discussions
AJIT PAWAR
Engineering, Inspector
V.J.T.I., India, Joined Feb 2009, 8

AJIT PAWAR

Engineering, Inspector
V.J.T.I.,
India,
Joined Feb 2009
8
12:07 Feb-19-2009
DAC

What is mean by DAC curve & FBH in UT ?

 
 Reply 
 
Paul Meyer
R & D,
GE Inspection Technologies, USA, Joined Nov 1998, 47

Paul Meyer

R & D,
GE Inspection Technologies,
USA,
Joined Nov 1998
47
12:33 Feb-19-2009
Re: DAC
In Reply to AJIT PAWAR at 12:07 Feb-19-2009 (Opening).

FBH means "Flat Bottom Hole", which is a standard reference reflector used in ultrasonic testing. When an actual defect is detected, the amplitude of its reflected echo is compared to echos of flat bottom holes of various diameters. This gives some indication of the size of the defect.
But the sound field from a UT probe spreads as it propagates, decreasing in intensity. Also, reflections from defects spread on their travel back to the probe. Therefore, as a defect moves farther from the UT probe, its echo amplitude decreases. In order to maintain some correlation between the defect echo amplitude and the size of a defect, a correction must be made for the distance between the probe and the defect. This is a DAC, or Distance Amplitude Correction. The DAC is a function of the probe and defect characteristics. Therefore, the FBH (Flat Bottom Hole) is used for reference, and a DAC is developed for the probe characteristics being used.
I hope this helps,
Paul

 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

IntraPhase Athena Phased Array System

The Athena Phased Array system, manufactured by WesDyne NDE Products & Technology, consists of a pha
...
sed array acquisition system and PC running IntraSpect software. A PC is used to perform acquisition, analysis and storage of the data. System hardware is capable of operating up to four data sets with any combination of phased array or conventional UT probes. NOW AVAILABLE IN 64-64 CONFIGURATION.
>

NDT.net launches mobile-friendly design

NDT.net has revamped its website providing a mobile-friendly design.The front page received a comp
...
letely new design and all other sections are now reacting responsively on mobile devices. This has been a major step to make our website more user- friendly.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window