where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1196 views
Technical Discussions
Jaga
Jaga
03:24 Feb-19-2009
Does Phasor XS(Phase Array) code compliace to ASME CC2235-9

Dear All,

Does Phasor XS code compliance to CC2235-9?As far I concern,this unit incompatible to execute sector scan(B-scan) with encoder to record out the scan.In short,we can't acquire recordable executed scan(side view) or even can't record defect size length.And in order to execute defect sizing,we need to do it manually by using manual UT probe. Does this attributes can comply ASME CC2235-9 in lieu of radigraphy?Please advice and correct me if I'm wrong.Thanks.

 
 Reply 
 
Manfred Richter
Consultant,
Richter & Tomasi Ltd., Brazil, Joined Jan 2008, 31

Manfred Richter

Consultant,
Richter & Tomasi Ltd.,
Brazil,
Joined Jan 2008
31
14:47 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

Jaga,
recently GE upgrade the phasor, and it possible to acquire encoded data now . The new ones was demonstrated for our company.

 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 280

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
280
23:17 Feb-20-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to Jaga at 03:24 Feb-19-2009 (Opening).

The original Phasor could not meet the requirements and GE quickly became aware of that. they have upgraded now and you should be able to achieve it with the new units. Talk to your GE rep.

Regards

 
 Reply 
 
Jaga
Jaga
03:29 Feb-21-2009
Re: Does Phasor XS(Phase Array) code compliace to ASME CC2235-9
In Reply to John O'Brien at 23:17 Feb-20-2009 .

Dear All,
Thanks for your speedy response.As far I concern,encoded inspection with the Phasor XS is only possible in CScan mode(Top view).The C-Scan is uncorrected and doesn't portray the correct view ,to carry out defect sizing base on the C scan view.Still need to carry out manual sizing by using conventional UT technique.From this findings, I assume the phasor XS still can't comply CC2235-9.Please advice and correct me if I'm wrong. Thanks a lot.

 
 Reply 
 

Product Spotlight

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Silverwing RMS PA - Phased-array corrosion mapping

Eddyfi Technologies integrated two market leading solutions, Silverwing’s RMS and M2M’s instru
...
ments to provide a high-speed, remote access ultrasonic phased-array inspection system with live total focusing method (TFM).
>

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window