where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
924 views
Technical Discussions
Dmitry Ostrovsky
Dmitry Ostrovsky
05:29 May-28-2001
3 layer PE - PU foam - PE pipe concentricity measurement

Please help! I am interested in on- line concentricity measurement of the pipe, which consists of 3 layers: PE internal pipe, Polyurethane foam, and PE outside pipe.

Can you advice companies I should contact?

Regards,

Dmitry Ostrovsky


    
 
 Reply 
 
Rolf Diederichs
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf Diederichs

Director,
NDT.net,
Germany,
Joined Nov 1998
608
09:45 May-28-2001
Re: 3 layer PE - PU foam - PE pipe concentricity measurement
: Please help! I am interested in on- line concentricity measurement of the pipe, which consists of 3 layers: PE internal pipe, Polyurethane foam, and PE outside pipe.
.
: Can you advice companies I should contact?
.
: Regards,
.
: Dmitry Ostrovsky

Refer to "Coextrusion Layer Thickness Measurement"
http://www.ndt.net/article/rohrext/us_coex/us_coe_e.htm

For multilayer foamed PVC pipes the first layer can be measured. The second Layer also, but not
for all thickness and density conditions. Usually be the last (inner) thin PVC layer cannot be measured.

I personally have done tests at Wavin in Germany to solve this problem.
The main problem is that the inner layer interferes with the backwall echo.
I see a little chance to measure the pipe, however the liability is questionable.
You may get better results near the die since the temperature is higher
and sound velocity is low. That means the separation of the inner layer echoes is better.
But all this is not easy and needs a lot of trials.

Rolf Diederichs



    
 
 Reply 
 
Dr. Patel
R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University, Canada, Joined May 2001, 20

Dr. Patel

R & D, Consultant to Universities/Industries
Fallon Ultrasonics/McMaster University,
Canada,
Joined May 2001
20
06:20 May-29-2001
Re: 3 layer PE - PU foam - PE pipe concentricity measurement
: Please help! I am interested in on- line concentricity measurement of the pipe, which consists of 3 layers: PE internal pipe, Polyurethane foam, and PE outside pipe.
.
: Can you advice companies I should contact?
.
: Regards,
.
: Dmitry Ostrovsky

We need details on tube and if you have small sample than you can send us. We are supplying number of systems for tube testing for OD ID and ovality and concentricity with very high accuracy. If you are interested than contact us at
Fallon Ultrasonics Inc.
3 Benemar Court, Hamilton, Ontario L8W 2R1
Canada.
.
Regards
Dr. Patel


    
 
 Reply 
 
Dmitry Ostrovsky
Dmitry Ostrovsky
02:13 May-30-2001
Re: 3 layer PE - PU foam - PE pipe concentricity measurement
I appreciate your comments and suggestions! As far as details on the application, max OD of the inner PE pipe is 110 mm; max OD of the outside PE layer is 162 mm with the wall thickness of the outside layer about 3.5 mm. We are just interested to track how well centered is the inside pipe in polyurethane.

Regards,

Dmitry Ostrovsky


: Please help! I am interested in on- line concentricity measurement of the pipe, which consists of 3 layers: PE internal pipe, Polyurethane foam, and PE outside pipe.
.
: Can you advice companies I should contact?
.
: Regards,
.
: Dmitry Ostrovsky
.



    
 
 Reply 
 

Product Spotlight

Webinar: A better way to inspect for surface and sub-surface cracking

Zetec to host webinar November 7 on a better way to inspect for surface and sub-surface cracking. In
...
this webinar, we will introduce a better method that offers industry-leading portability and flexibility, while delivering exceptional flaw detection. The webinar will review and demonstrate how this solution can be applied across numerous inspection applications. Register today!
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window