where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Phoenix Inspection Systems Limited
Design and manufacture ultrasonic Transducers, Scanners and Custom Solutions for NDT inspections. Innovators in NDT technology

1061 views
Career Discussions
KUMAR
KUMAR
08:23 Mar-21-2009
ASNT LEVEL lll BOOKS AND REFERENCES

IAM PREPARING FOR ASNT LEVEL lll EXAMS IN UT AND PT
COULD ANY ONE SUGGEST ME WHERE CAN I GET ONLINE MATERIALS OR WEB SITES
FOR EXAM PREPARATION
I REQUEST YOU ALL TO GIVE ME YOUR VALUABLE SUGGESTIONS
THANK YOU

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
13:01 Mar-22-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to KUMAR at 08:23 Mar-21-2009 (Opening).

Dear Kumar,

At the outset, my best wishes to you for success in the exams. I would strongly urge you to take the refresher course conducted by ISNT Hyderabad Chapter and NGC. As a part of that, several model questions are discussed. www.ndt.net and www.nde-ed.org have some good materials. You could also get the training materials in advance so that when you attend the refresher course, you would have already gone through the material a few times.

With best wishes,

Swamy

 
 Reply 
 
reza
reza
06:20 Jun-01-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to S.V.Swamy at 13:01 Mar-22-2009 .

Dear Swamy

thanx for your valuable helping and suggestion via comments , i am preparing for asnt level III exam in chenai(india-ISNT) for next year but i have two question:
1)Could you advise me to how study basic? consider Basic exam has many sourses?
2)How can downoad some basic questions?
3)Do you advise me to study all the references?

Thanks and Best Wishes
Reza

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
09:42 Jun-02-2009
Re: ASNT LEVEL lll BOOKS AND REFERENCES
In Reply to reza at 06:20 Jun-01-2009 .

I would suggest that you take the help of the ASNT Level III or the institute from where you plan to do the refresher course. ISNT also offers the refresher courses but there are many other players in the field. Each has his own approach. Find out what suits you.

Email me separately if you need more help.

Best wishes.

Swamy

 
 Reply 
 

Product Spotlight

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

OPBOX with standard software is able to do all types of inspections and measurements: flaw detection in welds and materials, scanning of objects, testing composite materials, forged and moulded pieces, many UT inspections, measurements of properties of ma

Typical applications: UT measurements with pulse technique, Measurement of thicknesses also at hig
...
h temperatures, Measurements of properties of materials, including fluids and gases We are delivering a standard version of the software (for any Microsoft Windows up to 10 x64 with Microsoft Hardware certification report Approved) and for special needs: SDK with ready to use examples for LabView, MATLAB x64, C++ wrapper for dll, Python and Linux., and also low-level description of how to control our devices directly from any USB tools
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window