where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Matec Instrument Companies, Inc.
Ultrasonic test instrumentation and systems for quality control inspection and production testing applications and scientific research.

625 views
Career Discussions
sadfqwert
sadfqwert
10:32 Apr-03-2009
NDT & Weldin in KSA

Hello everyboody!
I have to know & get suggestions and opinions of all of the respected members of this forum about the topic i.e NDT & Welding Inspection in Ksa i.e
Its scope in KSA,Qualification, Certification, Average monthly Salary (in Saudi Riyal) of an NDT Inspector and/or Welding Inspector,and qualification standards for NDT & Welding i.e ASNT,PCN,EN, ACCP and AWS,CSWIP,or any others which are most benefetial in Saudi Arabia.Thanks in anticipation.

 
 Reply 
 
Abbas Bombaywala
NDT Inspector
Free Lance, India, Joined Jul 2007, 93

Abbas Bombaywala

NDT Inspector
Free Lance,
India,
Joined Jul 2007
93
09:08 Apr-05-2009
Re: NDT & Weldin in KSA
In Reply to sadfqwert at 10:32 Apr-03-2009 (Opening).

Hi Sadf

Well there is a vast scope for NDT Technicians and Welding Inspectors in K.S.A, the qualification standards followed in K.S.A are ASNT, and for Welding Inspector they prefer CSWIP, The Salary of a NDT Technician with Level II in pt,mt,rt & ut are 2500 - 5000 S.R. depending upon the experience and a Welding Inspector will be paid from 5000 - 15000 s.r. again depending upon experience.

 
 Reply 
 
Hassan
Hassan
20:05 Apr-19-2009
Re: NDT & Weldin in KSA
In Reply to Abbas Bombaywala at 09:08 Apr-05-2009 .

Sadf,

salary is depending upon nationality and an experience in field.

Hassan

RSO

 
 Reply 
 

Product Spotlight

PAUT Probes

Typical Phased Array probes have frequencies between 1MHz and 20MHz and the number of wafers is 10
...
to 128. M2 Electronics offers customers conventionally ultrasound probes and the ability to provide high-precision Phased Array Ultrasound Probes of up to 256 wafers. We can also customize the probe for our customers to meet the specific application requirements of the user.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window