where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2644 views
Technical Discussions
APPA RAO
NDT Inspector
ASNT, Oman, Joined May 2006, 1

APPA RAO

NDT Inspector
ASNT,
Oman,
Joined May 2006
1
11:31 Apr-05-2009
Exemption of Hydro test/Pneumatic tests

Are NDT tests/examinations can replace Hydro test/Pneumatic test of Pressure Vessels? If so which code?

    
 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
22:03 Apr-12-2009
Re: Exemption of Hydro test/Pneumatic tests
In Reply to APPA RAO at 11:31 Apr-05-2009 (Opening).

Rao

if this is for new build vessels then you have problems getting around the requirements. Most codes pretty much insist unless the test poses a risk to the vessel or environment - for example hydrotesting a refractory lined vessel would be apoor choice. If this is for an in-service requirement post repair or replaceemnt you have more options. Look to API 510 to give guidance. You need to work with a pressure vessel engineer and NDE specialist to detrmine if the appied NDE can justify waiving the test.

    
 
 Reply 
 
R Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

R Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
04:27 Apr-13-2009
Re: Exemption of Hydro test/Pneumatic tests
In Reply to John O'Brien at 22:03 Apr-12-2009 .

Mr. O'Brien covered this pretty well. For vessels already in service, API-510 requires the concurrence of a 510 certified Inspector [who has inspected your vessel] and a pressure vessel engineer. For new ASME vessels the Inspector would be the Authorized Inspector.

    
 
 Reply 
 

Product Spotlight

Ultrasonic Squirter/Gantry System

TecScan’s NDT Ultrasonic Gantry Systems are industrial Squirter scanners designed for non-destru
...
ctive quality testing and raster scanning of large structures and parts. The Gantry Systems are usually composed of an Industrial Mechanical Scanner and a Control Room with System Workstation.
>

NEOS III

NEOS III is Logos Imagings lightest DR system. With a built-in battery and internal wireless commu
...
nication, the NEOS III is perfect for users that want to quickly assess an item.
>

SONOAIR - air-coupled Phased Array Ultrasonic Inspection System

For highly attenuating materials, the performance of the system is critical. The ultrasonic sensors,
...
the scanning area and the system settings should be flexibly adapted to the test task and the material. These high expectations are met with the new and modular testing system SONOAIR. With the world’s first air-coupled phased-array UT inspection system SONOAIR we developed a technology that works with up to 4 transmitter and receiver channels with freely configurable square wave burst transmitters as wells as low noise receiving amplifiers.
>

Research Center IDEKO develops an ultrasonic train wheel inspection system for CAF

The Basque Research centre IK4-IDEKO has developed a state-of-the-art ultrasonic inspection system f
...
or the train wheel. This system secures a sound condition of train wheels and is thus a significant contribution to rail transport safety. The device was delivered to CAF recently and its use allows the manufacturer to become an approved supplier of rolling stock in Italy, as it meets the demanding homologation standards of this country. \\\\r\\\\n
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window