where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1148 views
Technical Discussions
Simon
Simon
08:53 Apr-13-2009
NDT on Agri Products

Hi All,

I am looking for various NDT methods - suggestions and recommendations to check / test Agri Products including and specifically for Vegetables and Friuts for sorting or ripening process.

Thanks in advance

Simon Amallraja

 
 Reply 
 
ezio
Other, Retired ex Laboratory Technical Manager
OMECO Research Centre, Italy, Joined Sep 2008, 273

ezio

Other, Retired ex Laboratory Technical Manager
OMECO Research Centre,
Italy,
Joined Sep 2008
273
19:32 Apr-13-2009
Re: NDT on Agri Products
In Reply to Simon at 08:53 Apr-13-2009 (Opening).

There are in Italy an important institute in the area wine and apples, perhaps they have any ideas: http://www.ismaa.it/

 
 Reply 
 
Liviu Singher
R & D,
Technion, Israel, Joined Nov 1998, 11

Liviu Singher

R & D,
Technion,
Israel,
Joined Nov 1998
11
10:10 Apr-14-2009
Re: NDT on Agri Products
In Reply to Simon at 08:53 Apr-13-2009 (Opening).

There are many methods that were used to inspect fruit quality. You can look at spectroscopy as well as acoustics. Do you look for a more specific application?

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
14:50 Apr-14-2009
Re: NDT on Agri Products
In Reply to Simon at 08:53 Apr-13-2009 (Opening).

There are x-ray based equipment for high speed sorting of fruits and vegetables (my colleagues in BARC were developing one for checking out mangoes meant for export to USA). Spectrometric sorting (based on light, color) coupled with high speed image analysis can also do the job if the fruits are naturally ripened. Probably system integraters may be able to put together different off the shelf systems to achieve a specific output.

Would be happy to be associated with any such development work!

 
 Reply 
 
Simon
Simon
19:13 Apr-14-2009
Re: NDT on Agri Products
In Reply to Liviu Singher at 10:10 Apr-14-2009 .

More specifically for storing the Vegetables and Fruits in Cold Storage facilities after harvest, before export and or local distribution.

This should help the buyer - including the consumer to buy good quality products from any store acroos India or anywhere.

If you have done similar projects, I would like to understand the technique and possibly market to system to some of our hot potential customer

S.V.Swamy: I would like to get in touch with your collegue in BARC. Kindly give me the contact details.



Regards

D.Simon Amallraja

 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window