where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

Vallen-Systeme GmbH
The Acoustic Emission Company! Since 1987 Vallen stands for competence and continuity in AE and for reliable business cooperation and support.
1041 views
Technical Discussions
Jack Tensen
Jack Tensen
17:07 Apr-14-2009
Surface waves on hot steel plates

Dear readers,

I am looking for a way to use surface Rayleigh waves on hot steel plates (150-180 degr. C.)
I am thinking on coupling the sound in the plate by means of a squirter and a high water flow.
The probe is positioned about 3-4 cm above the plate and water flows through the squirter over the plate. Iam not sure this will work specially for the Rayleigh waves travelling over the steel/water boundary?
Has anyone experience with this or other suggestions? please I like to know

 
 Reply 
 
Borja
Director
Innerspec Technologies, USA, Joined Jun 2002, 36

Borja

Director
Innerspec Technologies,
USA,
Joined Jun 2002
36
20:40 Apr-14-2009
Re: Surface waves on hot steel plates
In Reply to Jack Tensen at 17:07 Apr-14-2009 (Opening).

EMAT is a very good option for generating ultrasound on hot materials, and it is especially well suited for generation of guided waves (including surface waves). You can visit www.innerspec.com for additional information.

 
 Reply 
 
Tom Nelligan
Engineering,
retired, USA, Joined Nov 1998, 390

Tom Nelligan

Engineering,
retired,
USA,
Joined Nov 1998
390
20:53 Apr-14-2009
Re: Surface waves on hot steel plates
In Reply to Jack Tensen at 17:07 Apr-14-2009 (Opening).

I have never tried the test at high temperature, but at normal environmental temperatures the water on the surface of the metal can be an issue. An incident longitudinal wave in a water column at the correct angle will generate a Rayleigh wave in steel, but the Rayleigh wave will be very quickly dampened by the water on the surface, and not travel very far before dissipating. That may be a problem depending on the specific sensitivity and sound path length requirements of your test.

 
 Reply 
 

Product Spotlight

UCI Hardness Tester NOVOTEST T-U2

UCI hardness tester NOVOTEST T-U2 is is used for non-destructive hardness testing of: metals and
...
alloys by scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); non-ferrous metals, alloys of iron etc., and using five additional scales for calibration; with tensile strength (Rm) scale determines the tensile strength of carbon steel pearlitic products by automatic recalculation from Brinell (HB) hardness scale.
>

MUSE Mobile Ultrasonic Equipment

The MUSE, a portable ultrasonic imaging system, was developed for in-field inspections of light-weig
...
ht structures. The MUSE consists of a motor-driven manipulator, a water circulation system for the acoustic coupling and a portable ultrasonic flaw detector (USPC 3010). The MUSE provides images of internal defects (A-, B-,C- and D-scan).
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Wireless TOFD scanner

Quick, accurate and highly reproducible welds testing. The System operates wirelessly and is compat
...
ible with any type of Windows based Laptop, Desktop or Tablet.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window