where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
852 views
Technical Discussions
Tyler
Tyler
01:09 Apr-15-2009
Advantages of thermography over radiography?

I was interested in looking more into thermography and was wondering the advantages it has over radiography. If anyone has any info it would be greatly appreciated.
Thanks

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
16:47 Apr-15-2009
Re: Advantages of thermography over radiography?
In Reply to Tyler at 01:09 Apr-15-2009 (Opening).

They are two different methods employing different principles of NDT. Thermography is used for evaluation of composites where radiography may have limited applications. Both are essentially useful for volumetric defects in preference to planar defects.

I would suggest that you choose the appropriate method for a given material, processing and size, shape etc.

Swamy
NDT Guru

 
 Reply 
 
Jason Ostroff
Jason Ostroff
18:37 Apr-15-2009
Re: Advantages of thermography over radiography?
In Reply to Tyler at 01:09 Apr-15-2009 (Opening).

What type of material is being tested is the first question of concern. The second question is what are the types of discontinuities to be detected. As was stated in an earlier reply, it is a vloumetric inspection that could produce qualatative and quantative data. There are several different types of thermograpy that use differnt types of heat sources. If we are talking about metals there is a considerable amount of heat that is needed to gather data. If the material in question is composite, then the heat input variable goes down. If you would like to discuss more about applications you can give me an email jason.ostroff@mistrasgroup.com and I would be happy to try and help further with the best pracitces and guidance.

 
 Reply 
 

Product Spotlight

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

TESTD-PT SYSTEM

Pulse thermography is a non-contact test method that is ideal for the characterization of thin fil
...
ms and coatings or the detection of defects. With a remarquable short test time and a high detection sensitivity, the Telops TESTD-PT is the perfect tool for non- destructive testing. With such high frame rates, it is even possible to investigate highly conductive or diffusive materials.
>

ISONIC 3510

Very Powerful Superior Performance Extremely Portable Smart Phased Array Ultrasonic Flaw Detector an
...
d Recorder with 2 Conventional UT and TOFD Channels uniquely combines PA, single- and multi-channel conventional UT, and TOFD modalities providing 100% raw data recording and imaging. Suitable for all kinds of every-day ultrasonic inspections
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window