where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
508 views
Technical Discussions
Nigel Armstrong
Engineering, - Specialist services
United Kingdom, Joined Oct 2000, 1096

Nigel Armstrong

Engineering, - Specialist services
United Kingdom,
Joined Oct 2000
1096
11:34 Apr-16-2009
Phased Array software

Gentlemen

I have recently gained CSWIP manual PA Level 2 certification. At work we have an Omniscan MX PA system.

From my own limited experience I think that the Tomoview software is an essential element of the PAUT tool-kit. Some experienced PAUT techs have told me they prefer to evaluate directly from the MX display. What are the pros and cons of either approach? Would value your comments.

Regards

Nigel

 
 Reply 
 
Aaron Greenbank
Aaron Greenbank
13:46 Apr-16-2009
Re: Phased Array software
In Reply to Nigel Armstrong at 11:34 Apr-16-2009 (Opening).

Nigel,

The requirement for using Tomoview will depend a great deal on the inspection requirements. It is true that some experienced inspectors will do their initial evaluations onboard the Omniscan, 'primarily because it is quicker this way and does not require the use of a loptop in the field. Having said that, the majority of inspectors, I believe, will do some form of post analysis and sentencing of the inspection data using Tomoview. In addition, Tomoview allows for less experienced technicians to perform the data acquisition of an inspection and the data can be reviewed remotely by a more experienced inspector. There are several good reasons for using Tomoview, these are only a few. Please let me know if I can answer any additional questions.

Regards

Aaron Greenbank
Product Manager - Omniscan

 
 Reply 
 

Product Spotlight

Research and Application Development For NDT

Acuren’s Research and Application Development specializes in the development of advanced ultraso
...
nic inspection techniques and systems for challenging inspection applications, with an emphasis on practical solutions which are field deployable. Services include manual and automated ultrasonic inspection system development, inspection technique optimization using laboratory scale studies and ultrasonic modeling (CIVA, BeamTool), preparing technical justification for technique evaluation and qualification (Probability of Detection and sizing accuracy studies), inspection/calibration/analysis procedure preparation to support field deployment of custom techniques, and development of custom imaging algorithms to support challenging inspection applications.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Magnetic X-Ray Pipeline Crawler 6''-60''

Suitable to work in 6''-60''diameter with speed of up to 18m/min, Max. moving diatance 5 kilometer
...
s and provide the efficient inspection of the pipeline.
>

IRIS 9000Plus - Introducing the next generation of heat exchanger inspection.

Representing the seventh generation of the IRIS system, the IRIS 9000 Plus has nearly 200 years of c
...
ombined field inspection experience incorporated in its design. This experience combined with a strong commitment to quality and a history of innovation has made Iris Inspection Services® the undisputed leader in IRIS technology.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window