where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
808 views
Technical Discussions
Xavier GROS
Xavier GROS
07:25 Jun-11-2001
Ultrasonic PHASED ARRAY Technology

Group Sponsored Project
PHASED ARRAY TECHNOLOGY
A PRACTICAL EVALUATION OF THE BENEFITS
Ultrasonic inspection plays an important role in assuring the quality and integrity of engineering components. However almost all industrial inspections are based on probes which produce fixed ultrasonic beams. This contrasts with the situation in medical applications where special phased array probes are routinely used to produce beams which sweep through the inspection volume, allowing highly detailed real-time images to be produced.
Previous use of phased array techniques and equipment in other sectors has tended to be restricted to laboratory or highly specialised applications. However recent developments mean that they are now available for wider industrial use and may represent the biggest advance in industrial ultrasonics since the time of flight diffraction (TOFD) technique. Potential advantages include:
Improved defect detection,
More accurate defect sizing,
Easier to interpret ultrasonic signals (displaid in an image format),
Faster inspections (reduction in inspection time).
Industrial interest in phased array techniques is rapidly increasing. However, as with any new technology it is important that capability is properly determined and both advantages and limitations identified.
We have therefore launched a Group Sponsored Project on “A Practical Evaluation of Phased Array Techniques”. It is intended to increase understanding within the sponsoring organisations of phased array technology, and allow them to make informed decisions on the acceptability and potential benefits for their own applications.
I hope this is of interest to you. If you wish to receive more information, if you wish to participate, or if you have any queries, please do not hesitate to contact me.
Yours sincerely,
Xavier GROS
Senior Project Engineer
NDT Development and Services
xgros@mitsuibabcock.com


    
 
 Reply 
 
Jeffery
R & D, Ultrasonic Phased Array, Physical Science, NAS-410 LIII
NASA, USA, Joined Dec 1999, 37

Jeffery

R & D, Ultrasonic Phased Array, Physical Science, NAS-410 LIII
NASA,
USA,
Joined Dec 1999
37
09:34 Jun-11-2001
Re: Ultrasonic PHASED ARRAY Technology
Xavier -

I am happy to hear of the growing interest in the Phased Array technology.

I work for NASA, at the Marshall Space Flight Center. We have a R/D Tech Tomoview system with one transducer: 64 element array, 10Mhz.

We are developing the inspection techniques for use on Friction-Stir welds of the External Tank. This will eventually be used in production -- probably a crawler type bridge, with dual 64 element, or maybe dual 128 element, transducers. Vertical inspection.

There seemed to be a large initial learning curve for Phased Array inspection, but we now are very confident in this method. We are detection LOP @ 0.020" and above, with detection of LOF as well.

Sensitivity, detection, mapping - all seem to surpass any other NDT method we have currently. RT, PT, ET, nothing comes close to the data the Phased Array unit gives.

I would like to keep informed of others who are using this method. As you mentioned, presently, we are in a "lab" environment, but soon will move to the production floor on full scale External Tanks.

In the lab, we have plates of 0.320" & 0.650", but now are able to inspect tapered plates of 0.650-0.320 just fine.

Thanks for the post.

Jeffery L. Leak - ED32
National Aeronautics and Space Administration
George C. Marshall Space Flight Center
MSFC, AL. 35812


: Group Sponsored Project
: PHASED ARRAY TECHNOLOGY
: A PRACTICAL EVALUATION OF THE BENEFITS

: I hope this is of interest to you. If you wish to receive more information, if you wish to participate, or if you have any queries, please do not hesitate to contact me.
: Yours sincerely,
: Xavier GROS
: Senior Project Engineer
: NDT Development and Services
: xgros@mitsuibabcock.com
.



    
 
 Reply 
 
Ken Head
Senior Level III
USA, Joined Jan 2000, 14

Ken Head

Senior Level III
USA,
Joined Jan 2000
14
06:02 Jun-13-2001
Re: Ultrasonic PHASED ARRAY Technology
Sign me up


    
 
 Reply 
 
James Anscomb
James Anscomb
02:49 Jun-20-2001
Re: Ultrasonic PHASED ARRAY Technology
: Xavier -

At present we are using the R/D Tech PipeWIZARD system to inspect pipeline girth welds.
I would be interested in receiving any information you have about Phased Array inspection.
Thanks
Jim


    
 
 Reply 
 

Product Spotlight

ISAFE3 Intrinsically Safe Sensor System

ISAFE3 intrinsically safe sensor system of Vallen Systeme is especially targeted at the petrochemica
...
l - as well as oil and gas transportation industry. The sensor system is designed for permanent monitoring or periodic inspection tasks. Sensors are available for different AE-frequency ranges optimized for corrosion and fatigue crack detection and other applications. The ISAFE 3 sensor system consists of an AE-sensor (model ISAS3) certified according to ATEX/IEC for installation in zone 0, gas group IIC, IP68, 20 to +60 °C, and a signal isolator (model SISO3) certified for installation in zone 2. An ISAS3 sensor can be mounted in atmosphere or submerged, e.g. in water or crude oil. It is supported by mounting tools for temporary (magnets) or permanent (welded) installation. ISAFE3 supports automatic sensor coupling test and can be used with any AE signal processor supporting 28V supply at 90 mA peak, e.g. Vallen Systeme ASIP-2/A.
>

FlexoFORM™

The FlexoFORM™ solution integrates flexible phased array probe technology in a scanner to solv
...
e the challenges that come with inspecting pipe elbows. When combined with a water column, this solution can be used to collect easy-to-interpret data on elbows with diameters ranging from 4.5 in. OD up to flat and offers many benefits.
>

High-performance Linear Phased Array Probes

Available to order from stock in a range of 5MHz – 7.5MHz and from 16 to 64 elements. Designed w
...
ith piezo-composite elements, Phoenix phased array probes provide high-resolution imaging to maximise sensitivity; accurate ultrasonic detection and sizing of defects in welds; and effective corrosion mapping. Housed in a rugged stainless steel case for on-site industrial NDT applications.
>

NEW Wheel Type Phased Array Probe

DOPPLER NEW Wheel Type Phased Array Probe, more stable, new tyre makes lesser acoustic attenuation
...
, much lighter makes easier to handle, more slim size, magnetic and mechanical encoder optional etc...more
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window