where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
639 views
Career Discussions
Kusnadie
Kusnadie
12:28 Apr-18-2009
Circular magnetization

Dear all,

Can you advise me, how to produce circular magnetic field on test piece which as no acces to
pass through the shooting rod

Test piece that will inspect is threaded guide shoe and float collar.

My facility that available to produce circular magnetic field are shooting rod with CDS and AC Yoke


Regards,

Kusnadie

 
 Reply 
 
Bruce McPherson
Consultant
MFL Services, United Kingdom, Joined Mar 2009, 26

Bruce McPherson

Consultant
MFL Services,
United Kingdom,
Joined Mar 2009
26
13:03 Apr-18-2009
Re: Circular magnetization
In Reply to Kusnadie at 12:28 Apr-18-2009 (Opening).

Kusnadie,
You could try the adjacent conductor method. Place the shooting rod on top of the pipe (make sure it's electrically insulated from the pipe) and then shoot it. Use a Burmah Castrol strip or equivalent to see if there is enough residual circular field to do the inspection. if not shoot the rod again (and again if necessary) until you get enough residual field. Also check how far around the circumference of the pipe the magnetic field is strong enough to do the inspection. This will tell you how many places around the circumference you have to shoot the rod to inspect the full circumference of the pipe.
If you can't get a strong enough magnetic field using this method, then I'm afraid it will have to be the AC yoke

Best Regards

Bruce

 
 Reply 
 
Kusnadie
Kusnadie
14:04 Apr-18-2009
Re: Circular magnetization
In Reply to Bruce McPherson at 13:03 Apr-18-2009 .

Bruce,

Thank you for reply, I will try ASAP

 
 Reply 
 

Product Spotlight

Panther

M2M PANTHER is a phased-array equipment designed for both desktop and industrial applications, offer
...
ing unparalleled performance in a compact unit. It combines the speed required for industrial integrated Phased-Array Ultrasound (PAUT) solutions, with the most complete set of total focusing method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
>

NDT Master Lecturer

In the program both university professors and practitioners will give lectures, which guarantees the
...
oretical depth and practical inside. Academic Director: Prof. Dr. Christian Boller
The following lecturers are not complete: Prof. Tadeusz Stepinski, Prof. Wieslaw Staszewski, Prof. Frank Walther, Prof. Giovanni Bruno, Prof. Gerd Dobmann, Prof. Philippe Guy
>

OmniScan™ X3 flaw detector

The OmniScan X3 flaw detector is a complete phased array toolbox. Powerful tools, like total focus
...
ing method (TFM) images and advanced visualization capabilities, enable you to complete your inspection with greater confidence.
>

XRHRobotStar

In high volume industries like automotive the requirement for a hundred percent X-ray inspection c
...
reates a bottleneck in the production. The XRHRobotStar is a fully Automated Defect Recognition (ADR) capable robot-system that allows an ultra-fast in-line inspection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window