where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
684 views
Career Discussions
Kusnadie
Kusnadie
12:28 Apr-18-2009
Circular magnetization

Dear all,

Can you advise me, how to produce circular magnetic field on test piece which as no acces to
pass through the shooting rod

Test piece that will inspect is threaded guide shoe and float collar.

My facility that available to produce circular magnetic field are shooting rod with CDS and AC Yoke


Regards,

Kusnadie

 
 Reply 
 
Bruce McPherson
Consultant
MFL Services, United Kingdom, Joined Mar 2009, 26

Bruce McPherson

Consultant
MFL Services,
United Kingdom,
Joined Mar 2009
26
13:03 Apr-18-2009
Re: Circular magnetization
In Reply to Kusnadie at 12:28 Apr-18-2009 (Opening).

Kusnadie,
You could try the adjacent conductor method. Place the shooting rod on top of the pipe (make sure it's electrically insulated from the pipe) and then shoot it. Use a Burmah Castrol strip or equivalent to see if there is enough residual circular field to do the inspection. if not shoot the rod again (and again if necessary) until you get enough residual field. Also check how far around the circumference of the pipe the magnetic field is strong enough to do the inspection. This will tell you how many places around the circumference you have to shoot the rod to inspect the full circumference of the pipe.
If you can't get a strong enough magnetic field using this method, then I'm afraid it will have to be the AC yoke

Best Regards

Bruce

 
 Reply 
 
Kusnadie
Kusnadie
14:04 Apr-18-2009
Re: Circular magnetization
In Reply to Bruce McPherson at 13:03 Apr-18-2009 .

Bruce,

Thank you for reply, I will try ASAP

 
 Reply 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

FAAST-PA! OEM Patented phased Array for high speed UT inspection

Multiangle, Multifocus, Multifrequency, Multibeam. Instead of stacking UT electronics and having m
...
any PA probes, FAAST-PA is able to transmit all delay laws within ONE single shot in Real time.
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

CIVA 2020 UT Module

CIVA NDE Simulation Software is the world leader of NDT Simulation. The UT simulation Module incl
...
udes: - "Beam computation": Beam propagation simulation - "Inspection Simulation": Beam interaction with flaws or specimens The user can simulate a whole inspection process (pulse echo, tandem or TOFD) with a wide range of probes (conventional, Phased- arrays or EMAT), components, and flaws.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window