where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDTSS - Non Destructive Testing Society of Singapore
Visit us at SINCE 2019
1023 views
Technical Discussions
Ed
Ed
07:46 Apr-20-2009
C/S Boiler Tube Inspection

Does anyone know of the best way to inspect carbon steel boiler tubes for leaks? These are approximate sizes.
38.1mm OD
31.7mm ID

38.1mm OD
63.5mm ID

 
 Reply 
 
Roger Duwe
NDT Inspector, API-510, 570, 653
MISTRAS, USA, Joined Jan 2009, 148

Roger Duwe

NDT Inspector, API-510, 570, 653
MISTRAS,
USA,
Joined Jan 2009
148
15:24 Apr-20-2009
Re: C/S Boiler Tube Inspection
In Reply to Ed at 07:46 Apr-20-2009 (Opening).

Hydro test the tubes, prefferably at a pressure greater than the Relief Valve setting. I would go 1-1/4 times PRV setpoint.

Second best is IRIS spinning-head UT inspection. Very slow, thus brutally expensive for a full boiler inspex.

 
 Reply 
 
Dent
Consultant, NDE Manager NDELevel III/3
NDT Consultant, Canada, Joined Nov 1998, 248

Dent

Consultant, NDE Manager NDELevel III/3
NDT Consultant,
Canada,
Joined Nov 1998
248
15:52 Apr-20-2009
Re: C/S Boiler Tube Inspection
In Reply to Roger Duwe at 15:24 Apr-20-2009 .

For gross leaks you may try an air test at low pressure. Use acoustics to listen for leaks.

 
 Reply 
 
Simon
Simon
19:45 Apr-20-2009
Re: C/S Boiler Tube Inspection
In Reply to Ed at 07:46 Apr-20-2009 (Opening).

You can try any of the Ultrasonic Leak Detectors with Ultrasonic Tone Generators to check the leaks in the pipes.

Sonatest has Soundscan units. Check their website

Simon

 
 Reply 
 

Product Spotlight

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window