where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

290 views
Job Offers
Masumi Smith
Masumi Smith
17:41 Apr-21-2009
NDT Supervisor position

Posted by SKC Siu Engineering Ltd.
Job Location: Coquitla, BC, CANADA

SKC Siu Engineering Ltd. (www.skcsiu.com) are welding and manufacturing consultants based in Coquitlam, BC. Over the past eleven years we have carefully built a reputation for delivering innovative and efficient solutions to welding and welding quality related issues. We are currently seeking an experienced NDT supervisor to join our growing team. The supervisor will provide consulting on appropriate NDT techniques and in-house training in inspection methods.

Minimum required experience:

CGSB Level 2 MT, UT, PT or ASNT equivalents
Relevant teaching/training and work experience in NDT methods,
A history of developing and practicing NDT instructions/procedures,
Demonstrated knowledge and application of CSA, ASME and AWS welding codes

Desirable qualifications:

A degree in applied science, the physical sciences or equivalent,
CGSB Level 3 MT, UT, PT and ASNT Level 3 MT, UT, PT
Experience in research and development

Salary will be commensurate with experience

 
 

Product Spotlight

Sci Aps Z-Series Portable Handheld Analysers

The world’s only handheld analyzer that measures carbon content in stainless (yes even L-grades),s
...
teels, and cast irons. Also accepted for low Si analysis for sulfidic corrosion analysis, and is widely used in the power industry for Cr analysis, for flow accelerated corrosion applications.
>

Extended Range Variable Wall® Piping Calibration Blocks for Longseam Inspection

This set of two blocks has been specially designed for situations where ultrasonic examination tak
...
es place circumferentially or “around the curve” for applications such as inspection of longseam welds in piping and vessels. Jointly designed by PH Tool and Holloway NDT, the blocks feature side-drilled hole reflectors positioned within novel compound-curves, each with multiple thickness steps. The unique design results in a light and compact form factor, with the largest block weighing just over 15 lbs and spanning just 16 ¾”. Coverage is provided for nominal pipe sizes from 6” to 10” in the small block and 12” to a whopping 56” in the large block. The compound OD curves and multiple wall thicknesses actually exceed ASME requirements, providing exceptional signal response and measurement accuracy. Properly managing beam divergence off the ID and stabilizing beam skew due to probe rocking is essential to maintaining a consistent calibration when inspecting lengthwise on curved surfaces.
>

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window