where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
395 views
Technical Discussions
Gaven Callanan
Gaven Callanan
07:57 Jun-13-2001
Testing of internal pipe coating for blistering and potential blister areas

I am looking for suitable tests to find all existing and potential blister areas on the internal pipe coating of a 1,4m dia pipe at present in 400m lengths. The coating is 1,5mm thick.


 
 Reply 
 
Joseph Pascente
Joseph Pascente
08:15 Jun-13-2001
Re: Testing of internal pipe coating for blistering and potential blister areas
Dear Gaven,

1. What is the wall thickness of the pipe?

2. Is there any wall loss on these pipe?

3. Were are you located?

4. We have an instrument that is capable of measuring the liner thickness
of pipe.


Regards,

Joe


 
 Reply 
 
David Smith
David Smith
00:49 Jun-14-2001
Re: Testing of internal pipe coating for blistering and potential blister areas
: Dear Gaven,
.
: 1. What is the wall thickness of the pipe?
.
: 2. Is there any wall loss on these pipe?
.
: 3. Were are you located?
.
: 4. We have an instrument that is capable of measuring the liner thickness
: of pipe.
.
:
: Regards,
.
: Joe
.

Gavin,
Phoenix manufacture an accoustic emission device which will detect blisters in pipes and will give you the cross section area loss and the distance from the transmitter. Bends and Tees have no effect, pipe diameters from 10-500mm and lengths to 500m. You need access at one point. If this is of interest then please contact me

David Smith
dsmith@phoenixisl.co.uk



 
 Reply 
 

Product Spotlight

Eddy Current inspection : RotoETscan Rotating Head

The rotating head RotoETscan detects the presence of longitudinal surface or sub surface defects a
...
t high speed. The rotating head is often installed directly on the production line. It is generally dedicated to the control of long products such as tubes, bars and wires, made of ferrous or non-ferrous material. It can also be used for inspection of small parts (billets).
>

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Cygnus 6+ PRO Multi-Mode Ultrasonic Thickness Gauge

The Cygnus 6+ PRO thickness gauge is the most advance gauge within the Cygnus range with key featu
...
res including: comprehensive data logging; A-scan and B-scan display; manual gain control; Bluetooth connectivity; and much more. With its unique dual display and three measuring modes (Multiple-Echo, Echo-Echo and Single-Echo), this surface thickness gauge offers maximum versatility for inspections.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window