where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
2571 views
Technical Discussions
Ivan Estupinan
Engineering
ILPM Engineering Cia Ltda, Ecuador, Joined May 2009, 3

Ivan Estupinan

Engineering
ILPM Engineering Cia Ltda,
Ecuador,
Joined May 2009
3
17:09 May-07-2009
NDT inspection of GRE pipelines

Hi,

I would like to know what NDT techniques can we use to prove that a GRE pipeline is in good condition after several years working, besides doing a hydro tets?? does anybody have expirience running intelligent pigs in composite materials pipelines??

Thanks in advanced

ivan

    
 
 Reply 
 
Muthu
Director, - -
Metalcare Group Inc., Canada, Joined Oct 2008, 15

Muthu

Director, - -
Metalcare Group Inc.,
Canada,
Joined Oct 2008
15
02:30 May-10-2009
Re: NDT inspection of GRE pipelines
In Reply to Ivan Estupinan at 17:09 May-07-2009 (Opening).

Ivan,
You could be more specific such as:
- Diameter of the piping,
- Type of product in the line
- Whether underground or above ground?
- Whether testing can be done during off-service?
- What are you looking for duing inspection whether corrosion, cracks or blockage?

This is kind of specific information on real scenarion will help the readers/experts to assist you.
Muthu

    
 
 Reply 
 
Ivan Estupinan
Engineering
ILPM Engineering Cia Ltda, Ecuador, Joined May 2009, 3

Ivan Estupinan

Engineering
ILPM Engineering Cia Ltda,
Ecuador,
Joined May 2009
3
17:10 May-11-2009
Re: NDT inspection of GRE pipelines
In Reply to Muthu at 02:30 May-10-2009 .

Sure, here is some more info:

Diameter of pipes is 6in and 8in,
Product in line is Crude oil but water cut is between 80-90%, so mostly very saline water.
Piping is underground
Testing should be done on service, to avoid production stopping because the Oilfield company does not want to displace the fluid to water only. They claim it would be to expensive.
TEsting is to prove no cracks are present in the line, no corrosion beacuse its GRE.


Ivan

    
 
 Reply 
 
John O'Brien
Consultant, -
Chevron ETC , USA, Joined Jan 2000, 278

John O'Brien

Consultant, -
Chevron ETC ,
USA,
Joined Jan 2000
278
20:39 May-11-2009
Re: NDT inspection of GRE pipelines
In Reply to Ivan Estupinan at 17:10 May-11-2009 .

Inspecting these lines is difficult without some access tio surface. GRE has well documented capabilities for in-service testing with Acoustic Emission - transmission distances between sensors and sensitivity is the issue. Speak to onme of the large AE service pproviders MISTRAS/Physical Acoustics, TUV Austria, etc.

    
 
 Reply 
 
Thomas Thenikl
Sales,
Vallen Systeme GmbH, Germany, Joined May 2009, 1

Thomas Thenikl

Sales,
Vallen Systeme GmbH,
Germany,
Joined May 2009
1
12:55 May-19-2009
Re: NDT inspection of GRE pipelines
In Reply to John O'Brien at 20:39 May-11-2009 .

in addition to John O´Briens list of very experienced service providers I would like to add

EA Brasil, Mr Arilson Rodrigues da Silva,
Estrada da Boiada, 2340 - Bairro Aquario - Vinhedo/SP, 13280-000 Sao Paulo
Tel: +55 19 9271-2715

Stress Engineering Services Inc., Mr Claudio Allevato
13800 Westfair East Drive, Houston, TX 77041-1101
Tel: +1-281-955 2900

Matrix Inspection & Engineering Inc., Mr Don Jennings
10607 Haddington Drive Suite 100, Houston, TX 77043
Tel: +1-713 722-7177

I am sure they will be gald to discuss issues of AE testing GRE pipelines

Thomas

    
 
 Reply 
 
Izyan
Izyan
03:12 Nov-22-2011
Re: Re: NDT inspection of GRE pipelines
In Reply to John O'Brien at 20:39 May-11-2009 .

Hi,

Apart from AE inspection for GRE, I'd like to know what are other possible NDT inspection for GRE?
Have you guys had any experience with Phase Array UT and Digital Radiography?

Regards,
Izyan

    
 
 Reply 
 
Sooravan T
Sooravan T
08:01 Feb-14-2019
Re: Re: NDT inspection of GRE pipelines
In Reply to John O'Brien at 20:39 May-11-2009 .

Hi Gent,
Can I have their contact details please to reach them for execution

    
 
 Reply 
 
Johann Hinken
FI Test- und Messtechnik GmbH, Germany, Joined May 2014, 18

Johann Hinken

FI Test- und Messtechnik GmbH,
Germany,
Joined May 2014
18
14:09 Feb-18-2019
Re: NDT inspection of GRE pipelines
In Reply to Ivan Estupinan at 17:09 May-07-2009 (Opening).

Istvan, you should also consider microwave testing, see
https://en.wikipedia.org/wiki/Microwave_imaging#Microwave_testing
Regards, Johann

    
 
 Reply 
 

Product Spotlight

EKOSCAN Phased Array

In order to always fit your needs, EKOSCAN can manufacture any type of UT transducer, either convent
...
ional or Phased Array. As an ISO 9001: 2015 certified company, EKOSCAN is extremely careful as far a material selection and manufacturing processes are concerned. Our probes guarantee our customers the benefits of latest innovations regarding piezo-composite, backing, impedance adaptation layer, etc. Specific probes for hostile environment: high temperature, high pressure, corrosive environment,etc. Specific probes designed to fit your specific application: optimization of every parameter to guarantee you the best detection.
>

Combination of Digital Image Correlation and Thermographic Measurements

The combination of measuring results from the digital image correlation (ARAMIS, DIC) and temperat
...
ure measuring data from infrared cameras permits the simultaneous analysis of the thermal and mechanical behavior of test specimens in the materials and components testing field.
>

Varex Imaging Large Field of View (FOV) Digital Detector Arrays (DDAs)

A larger FOV DDA can reduce the space and volume of the X-ray inspection system on the factory floor
...
, enable faster scanning times, better throughput and better resolution images at a lower dose. Customers can also save time and money. With these benefits in mind, Varex Imaging has designed a family of large FOV detectors (4343HE, XRD 1611, 4343DX-I, 4343CT) for our industrial imaging customers.
>

Aerospace Systems - Automated Ultrasonic Inspection

USL are specialists in the design and manufacture of turnkey ultrasonic inspection systems for aer
...
ospace applications. From monolithic composites to complex honeycomb structures. This video shows just a few examples of what is possible, find out more at: www.ultrasonic-sciences.co.uk
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window