where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GB Inspection Systems Ltd.
A leading UK manufacturer of Ultrasonic Probes, Accessories, Supplier of NDT Equipment and more.
296 views
Job Offers
Ali Azis Bin Salleh
Ali Azis Bin Salleh
03:14 May-18-2009
Welding.qa/qc,mechanical completion,Piping completion,Design Electric,Ultrasonic Technician

Job Location: MMHE,Pasir Gudang,Johore.
offered by Techno Analysis Sdn Bhd

Great day all,
Kindly be informed that at the present we need a candidates for the following positions:
1. Welding Engineer
2. QA/QC Engineer
3. Mechanical Completion Engineer
4. Piping Completion Engineer
5. Design Electric Engineer (Gumusut Kakap-Sri Alam) (6 candiddates)
6. Ultrasonic Technician with at least 5 years experienced
We seek for your kind assistance to provide us with the relevant CV/ resume for our further action. Kindly take note that only shortlisted candidate will be notified.
Please indicate post you want to apply
Do not hesitate to contact me if need any clarification for the above mentioned matter.
Email : technoanalysis@gmail.com

 
 

Product Spotlight

iProbe - USB Phased Array Probe

Turn your PC, Laptop or Tablet into a powerful 32:64 Phased Array system with our USB powered Phas
...
ed Array iProbe and inspection software package. Perform affordable weld inspection and corrosion mapping inspections with this powerful but small system. The probe has a 100V pulser, 8K PRF, dual axis encoder input and achieves outstanding signal quality.
>

FMC/TFM

Next generation for Phased Array UT is here now with FMC/TFM! Have higher resolution imaging, impr
...
oved signal to noise ratio, characterize, size and analyze defects better with access to several wave mode views and save raw FMC data for higher quality analysis.  Some of the benefits are:
  • Beautiful Image! Easier to understand what you're looking at
  • Completely focused in entire image or volume
  • Much easier to define setups before inspection
  • Easier to decipher geometry echoes from real defects
  • Oriented defects (e.g. cracks) are imaged better
  • See image from different wave modes from one FMC inspection
  • FMC data can be reprocessed/analyzed without going back to the field
>

TraiNDE UT

TraiNDE UT is a virtual tool associated with a signal database which simulates real inspection con
...
ditions for numerous applications (Type A/V1 block, DAC block, welds and plates).
>

Robotic laser shearography enables 100% inspection of complex, flight-critical composite structures

An article in “Composites World Magazine” showcases Non Destructive Testing of aero-structures
...
with Laser Shearography. Over the years Dantec Dynamics has supplied many solutions for the aerospace industry. Referring to specific customer projects several of these cases are examined to outline the advantages of using Laser Shearography for automated defect detection.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window