where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
1493 views
Career Discussions
Rolf
Director,
NDT.net, Germany, Joined Nov 1998, 608

Rolf

Director,
NDT.net,
Germany,
Joined Nov 1998
608
08:28 May-12-2009
NDT Webinar

In this month's issue we have announced two Webinar in our news. One from Olympus is called "The Benefits of Phased Array in Weld Inspection" at May 19,
http://www.ndt.net/search/docs.php3?id=7853&content=1

The other one from SGS "Guided Wave Inspection Technique" at May 13,14,26.
http://www.ndt.net/search/docs.php3?id=7856&content=1

Who knows about other NDT Webinar? And how useful they are in general? Or in particular the two recent one.
After you have visited them please post you opinion here.

 
 Reply 
 
S.V.Swamy
Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex , India, Joined Feb 2001, 787

S.V.Swamy

Engineering, - Material Testing Inspection & Quality Control
Retired from Nuclear Fuel Complex ,
India,
Joined Feb 2001
787
07:43 May-29-2009
Re: NDT Webinar
In Reply to Rolf at 08:28 May-12-2009 (Opening).

This is the first webinar that I sampled on the web (earlier my internet connection was too slow to allow that). My initial reactions are:

- it is definitely a good idea since experts located all over the world and those seeking solutions can come together

- the presentation has the same limitations as attending a real life seminar (the speaker and the visuals are not always synchronized)

- the US accent was a little difficult for me, esp. when not face to face

- if the bandwidth and internet speed allow, a video seminar may be better.

- Sub-titles can be provided post seminar to help those who are unable to understand the accent.

May be I will get used to the concept as I go along but right now, I would prefer a power point presentation embedded in a blog where comments can be posted and answered. Something like a forum.

Regards.

Swamy

 
 Reply 
 
Prasad Rajan
Director, NDT Consultant
Energy Workforce Group of Companies, Malaysia, Joined Aug 2003, 12

Prasad Rajan

Director, NDT Consultant
Energy Workforce Group of Companies,
Malaysia,
Joined Aug 2003
12
08:14 May-29-2009
Re: NDT Webinar
In Reply to Rolf at 08:28 May-12-2009 (Opening).

Dear Rolf,

I guess this is the way to go as we have really enjoyed the Olympus NDT PA
video (the recorded Webinar at http://www.olympus-ims.com/en/weldinspection/).

This is will open up a lot more area for the people to describe their
problems in the video format and upload in the web for expert advice. Also a
good marketing tool for service providers like us!

However is there any way to increase the size of the webinar video display?
It is difficult to view some of the writings due to its small size

Regards,

Prasad

 
 Reply 
 
Ed Ginzel
R & D, -
Materials Research Institute, Canada, Joined Nov 1998, 1274

Ed Ginzel

R & D, -
Materials Research Institute,
Canada,
Joined Nov 1998
1274
13:08 May-29-2009
Re: NDT Webinar
In Reply to Rolf at 08:28 May-12-2009 (Opening).

Rolf,

I watched some of the Olympus NDT version of this. It seems to be a PowerPoint with audio. You did a
similar feature with the guest speaker at a conference 2-3 years ago. Perhaps the interaction
aspect with Webinar is a bit different and the technical implementation more convenient now than it
was for you 3 years ago. But ultimately this is a video presentation (from my simple perspective).
It seems to be a useful training tool, and it will also be an advertising tool.
The incorporation into the Forum is a good way for adding the information without worrying about the
monthly time schedule for publication.

 
 Reply 
 

Product Spotlight

FD800 Bench Top Flaw Detectors

The bench-top FD800 flaw detector range combines state-of-the-art flaw detection with advanced mater
...
ial thickness capabilities. Designed for use in the laboratory these gauges are the tool you need for all your flaw detecting needs.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

HARDNESS TESTER TKM-459CE combi

TKM-459CE combi applies 2 methods of hardness control: UCI and Leeb. It provides high-accuracy tes
...
ting of metals and alloys as well as items of different sizes and configurations, their hardened layers and galvanic coatings. Device represents results in HB, HRC, HV and others. Shock-, dust- and water-proof housing with intuitive software make this gauge easy to use in all working conditions.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window