where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

GE Inspection Technologies
Inspection Technologies, a business of the Baker Hughes, a GE company (BHGE IT), is one of the world's leading suppliers of nondestructive testin ...
809 views
Technical Discussions
Xavier GROS
Xavier GROS
07:25 Jun-11-2001
Ultrasonic PHASED ARRAY Technology

Group Sponsored Project
PHASED ARRAY TECHNOLOGY
A PRACTICAL EVALUATION OF THE BENEFITS
Ultrasonic inspection plays an important role in assuring the quality and integrity of engineering components. However almost all industrial inspections are based on probes which produce fixed ultrasonic beams. This contrasts with the situation in medical applications where special phased array probes are routinely used to produce beams which sweep through the inspection volume, allowing highly detailed real-time images to be produced.
Previous use of phased array techniques and equipment in other sectors has tended to be restricted to laboratory or highly specialised applications. However recent developments mean that they are now available for wider industrial use and may represent the biggest advance in industrial ultrasonics since the time of flight diffraction (TOFD) technique. Potential advantages include:
Improved defect detection,
More accurate defect sizing,
Easier to interpret ultrasonic signals (displaid in an image format),
Faster inspections (reduction in inspection time).
Industrial interest in phased array techniques is rapidly increasing. However, as with any new technology it is important that capability is properly determined and both advantages and limitations identified.
We have therefore launched a Group Sponsored Project on “A Practical Evaluation of Phased Array Techniques”. It is intended to increase understanding within the sponsoring organisations of phased array technology, and allow them to make informed decisions on the acceptability and potential benefits for their own applications.
I hope this is of interest to you. If you wish to receive more information, if you wish to participate, or if you have any queries, please do not hesitate to contact me.
Yours sincerely,
Xavier GROS
Senior Project Engineer
NDT Development and Services
xgros@mitsuibabcock.com


    
 
 Reply 
 
Jeffery
R & D, Ultrasonic Phased Array, Physical Science, NAS-410 LIII
NASA, USA, Joined Dec 1999, 37

Jeffery

R & D, Ultrasonic Phased Array, Physical Science, NAS-410 LIII
NASA,
USA,
Joined Dec 1999
37
09:34 Jun-11-2001
Re: Ultrasonic PHASED ARRAY Technology
Xavier -

I am happy to hear of the growing interest in the Phased Array technology.

I work for NASA, at the Marshall Space Flight Center. We have a R/D Tech Tomoview system with one transducer: 64 element array, 10Mhz.

We are developing the inspection techniques for use on Friction-Stir welds of the External Tank. This will eventually be used in production -- probably a crawler type bridge, with dual 64 element, or maybe dual 128 element, transducers. Vertical inspection.

There seemed to be a large initial learning curve for Phased Array inspection, but we now are very confident in this method. We are detection LOP @ 0.020" and above, with detection of LOF as well.

Sensitivity, detection, mapping - all seem to surpass any other NDT method we have currently. RT, PT, ET, nothing comes close to the data the Phased Array unit gives.

I would like to keep informed of others who are using this method. As you mentioned, presently, we are in a "lab" environment, but soon will move to the production floor on full scale External Tanks.

In the lab, we have plates of 0.320" & 0.650", but now are able to inspect tapered plates of 0.650-0.320 just fine.

Thanks for the post.

Jeffery L. Leak - ED32
National Aeronautics and Space Administration
George C. Marshall Space Flight Center
MSFC, AL. 35812


: Group Sponsored Project
: PHASED ARRAY TECHNOLOGY
: A PRACTICAL EVALUATION OF THE BENEFITS

: I hope this is of interest to you. If you wish to receive more information, if you wish to participate, or if you have any queries, please do not hesitate to contact me.
: Yours sincerely,
: Xavier GROS
: Senior Project Engineer
: NDT Development and Services
: xgros@mitsuibabcock.com
.



    
 
 Reply 
 
Ken Head
Senior Level III
USA, Joined Jan 2000, 14

Ken Head

Senior Level III
USA,
Joined Jan 2000
14
06:02 Jun-13-2001
Re: Ultrasonic PHASED ARRAY Technology
Sign me up


    
 
 Reply 
 
James Anscomb
James Anscomb
02:49 Jun-20-2001
Re: Ultrasonic PHASED ARRAY Technology
: Xavier -

At present we are using the R/D Tech PipeWIZARD system to inspect pipeline girth welds.
I would be interested in receiving any information you have about Phased Array inspection.
Thanks
Jim


    
 
 Reply 
 

Product Spotlight

NEW - TD Focus-ScanRX

The NEW Next Generation Advanced UT platform, TD Focus ScanRX - Also available as a card stack solut
...
ion. Key Improvements 1. Data acquisition is significantly faster than current design 2. Better aesthetic – closely aligns with HandyScan RX 3. Improved IP rating (Target IP66) 4. Ruggedized housing 5. Connectors are protected from impact and ingress 6. Integrated stand and separate retractable handle easy to keep clean) 7. Touchscreen with ruggedized display glass 8. 3-Axis encoder input
>

AIS229 - Multipurpose Real Time System

Latest standard & automatic real time system developed by Balteau. The AIS229 has been designed to
...
do series inspection in a wide variety of industry. Composed of a shielded cabinet, 5 axis manipulator, x-ray generator and tubehead from 160kV to 225kV, a fl at panel & much more, the AIS229 is most certainly one of the most multipurpose RTR system available on the market.
>

Navic - Steerable Modular Automated Scanner

The Navic is a modular, motorized, steerable scanner designed to carry multiple attachments used
...
in various scanning and inspection applications. The Navic is capable of weld scanning (girth welds and long seam welds), automated corrosion mapping, and tank scanning.
>

NEW! The PragmaPro Instrument Platform

The PragmaPro is based on a modular cartridge technology and supports various NDT instrument modal
...
ities such as UT, PAUT, ECT and many more. This new platform is based on a machined, powder-coated aluminum frame for shock-proofness, best sealing qualities and maximum heat dissipation. This is practical to extend the outdoor temperature range and/or to extend the power injected in the transducers. The PragmaPro is aiming at a very wide range of applications, such as weld scanning, corrosion mapping and composite testing.
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window