where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
441 views
Technical Discussions
Phan The Long
Phan The Long
12:48 Jun-01-2009
Phase Array UT

Hi,

I am going to invest PA UT OMNI SCAN 16:128, Olympus for weld inspection, thickness from 10 - 50 mm. Anyone can advise me which accessories needed?

Thanks

 
 Reply 
 
Aaron Greenbank
Aaron Greenbank
16:14 Jun-01-2009
Re: Phase Array UT
In Reply to Phan The Long at 12:48 Jun-01-2009 (Opening).

If you can tell me where you are, I can arrange to have somone local contact you to help with your equipment choice, we would be happy to help.

Aaron Greenbank

 
 Reply 
 
Alex
Alex
15:16 Jun-03-2009
Re: Phase Array UT
In Reply to Phan The Long at 12:48 Jun-01-2009 (Opening).

Hi!
Probably, the variant on 32 channels will be more interesting.
Pay attention to the sizes of prisms.
At the big length of a prism you cannot supervise a direct beam welded seams on 10ìì and with small radius.
Probably, for a thickness 10ìì it is required more 5ÌÃö, (but the price...)
Necessity in phase frray on 64-128 elements depends on objects of the control.
Necessity of the scanner depends on objects of the control.
As the encoder on badly prepared surface to work not conveniently.
See alternative offers (comparing the price).
Successes!

 
 Reply 
 

Product Spotlight

Immersion systems

ScanMaster ultrasonic immersion systems are designed for high throughput, multi shift operation in a
...
n industrial or lab environment. These fully integrated systems provide various scanning configurations and incorporate conventional and phased arrays technologies to support diverse applications, such as inspection of disks, bars, shafts, billets and plates. All of ScanMaster immersion systems are built from high accuracy scanning frames allowing for scanning of complex parts and include a multi-channel ultrasonic instrument with exceptional performance. The systems are approved by all major manufacturers for C-scan inspection of jet engine forged discs. Together with a comprehensive set of software modules these flexible series of systems provide the customer with the best price performance solutions.
>

GUL QSR1® Scanning

How do you measure pipe wall thickness without direct access to the area? QSR® Scanning - Guide Wav
...
e Quantitative Short Range Scanning.
>

GEKKO - Portable Phased Array Testing with TFM in Real-Time

The portable phased array testing system GEKKO provides 64 parallel test channels. On creating testi
...
ng parameters the operator is assisted by the CIVA software. Due to its modular set-up the GEKKO instrument is suitable for operators of all skill levels.
>

PROlineTOP Plug & Play Ultrasonic inspection device

As Plug & Play solution it units all control and operation elements in a small housing and therefo
...
re replaces the typical control cabinet...
>

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window